
Hisense Brissa CA70BT2B split air conditioning
To air condition a room with a wall-mounted split: 5,418 frigories/h (6.3 kW) nominal in cooling.
- Pipe
- 3/8″ / 5/8″
- Wi-Fi
- Optional
- kcal/h
- ≈ 5.418
- Refrigerant
- R32
Description
To climate control a room with a wall-mounted split: 5,418 frigories/h (6.3 kW) nominal cooling capacity. Hisense Brissa CA70BT2B includes an indoor and an outdoor unit; it is not a system for distributing cold independently between multiple rooms. Check the load of the room and the installation space before choosing. Installation not included.
The choice of power depends on the space, its orientation, and its insulation. A split unit located in one room does not guarantee the same temperature in adjacent rooms; to serve multiple rooms, it is advisable to consider a multisplit system or a ducted installation.
Wi-Fi control is optional and requires an accessory that is purchased separately.
What does Hisense Brissa CA70BT2B include?
1×1 composition documented by Hisense: CA70BT2BG + CA70BT2BW.
| Model | Component | Supply scope |
|---|---|---|
| CA70BT2BG | Wall-mounted indoor unit 998 × 325 × 225 mm | 1 included |
| CA70BT2BW | Outdoor unit 860 × 667 × 310 mm | 1 included |
| R2-01 | Brissa wireless remote control The design of the remote control may vary due to catalog updates. | 1 included |
Installation, pipes, supports, and Wi-Fi kit not included.
Illustrative images of the Brissa range, not to scale. The indicated measurements correspond to the references of this set.
What to check before installing Hisense Brissa CA70BT2B?
The choice of equipment does not replace the inspection of the installation by a qualified professional.
- Consult the installer about the required power based on the area, orientation, and insulation.
- Check the space of both units and the refrigeration line 3/8″ / 5/8″.
- The installation and the Wi-Fi kit are contracted separately.
Hisense Brissa CA70BT2B
- Brand
- Hisense
- Model and composition
- Hisense Brissa CA70BT2B
- Supply scope
- Indoor unit, outdoor unit, and wireless control. Optional Wi-Fi kit.
- Installation
- Not included
- Availability and transport
- Price including VAT. Installation not included. Not shipped to islands, Ceuta, Melilla, or abroad.
Installation at a glance
- Interior
- 998 × 325 × 225 mm width × height × depth
- Exterior
- 860 × 667 × 310 mm width × height × depth
- Pipe · liquid / gas
- 3/8″ / 5/8″
- Maximum length
- 20 m
- Maximum slope
- 15 m
- Power supply
- Single-phase · 220–240 V · 50 Hz
Specifications and dimensions of the model
Capabilities, consumption, efficiency, noise, and dimensions of this set. The testing conditions and climate are part of each value.
- Nominal cooling of the unit
- 6.30 kW
Power and efficiency of the system - kcal/h
- ≈ 5.418
Power and efficiency of the system · Nominal capacity in cold × 860 - SEER / SCOP
- 6,30 / 4,00
Power and efficiency of the system · SCOP in moderate climate - Cold efficiency
- A++
Power and efficiency of the system - Efficiency in heat
- A+
Power and efficiency of the system · Average climate - Interior · width × height × depth
- 998 × 325 × 225 mm
Dimensions of the units - Exterior · width × height × depth
- 860 × 667 × 310 mm
Dimensions of the units - Refrigerant
- R32
Installation and equipment - Pipe · liquid / gas
- 3/8″ / 5/8″
Installation and equipment - Maximum length
- 20 m
Installation and equipment - Maximum slope
- 15 m
Installation and equipment - Power supply
- Single-phase · 220–240 V · 50 Hz
Installation and equipment - Wi-Fi
- Optional
Installation and equipment · Requires AEH-W41H1 kit not included - Remote control from the range
- R2-01
Installation and equipment · Design subject to catalog update - Warranty
- 3 years
Installation and equipment · According to Hisense conditions and applicable use
- References and verified data in the Hisense documentation 2026. Please consult the installation manual of the supplied revision.
