Biasi 3-Way Valve 24S Ref. BI1141500

Biasi 3-Way Valve 24S Ref. BI1141500

Stock · 3 units

The Biasi 3-Way Valve 24S is a component that manages the flow of water between the heating circuit and the domestic hot water circuit in your boiler. When this part fails, you may notice that you have hot water but no heating, or vice versa, and there may even be a mixing of both circuits. This valve is compatible with several boiler models, including MINOX 24 A, MINOX 24 E, and MICON 24 E, among others. Replacement is necessary when these symptoms of improper operation occur.

VAT included

Compatibility

Biasi boilers compatible with reference BI1141500

3-way valve with reference BI1141500. Three confirmed compatibilities: MINOX 24 A and MINOX 24 E.

Proven compatibility

Boiler modelFamilyVerification
Biasi MINOX 24 AMINOXContrasted
Biasi MINOX 24 EMINOXContrasted
Biasi MICON 24 EMICONContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if the part number BI1141500 is the one for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference BI1141500. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the BI1141500 three-way valve resolves.

The 3-way valve diverts water between heating and domestic hot water. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The valve gets stuck after the summer: when turning the heating back on, it takes time to distribute the water properly between the two circuits.

    Cause: Months without movement allow lime and debris from the circuit to clog the brass shutter from the inside.

    Force several heating and domestic hot water cycles in succession when restarting the season, and check if the distribution improves with use before replacing it.

  • 02

    The domestic hot water comes out with less pressure or is interrupted when there is also a demand for heating.

    Cause: The internal shutter, worn from use, does not completely close the heating flow when it should prioritize the domestic hot water.

    Manually turn off the heating and check if the domestic hot water flow improves; if it does, the problem lies in the distribution of the valve.

  • 03

    Dark residue or rust comes out of the hot water tap when the boiler has been idle for a while.

    Cause: The brass body and its joints wear out over the years and release particles into the circuit.

    Let the water run for a couple of minutes after a long period of inactivity before assuming that the gas valve is broken.

  • 04

    You notice a slow drip in the area where the gas valve connects to the pipes, more visible when the boiler has been running for a while.

    Cause: The sealing gaskets give way due to thermal expansion after years of service.

    Carefully tighten the nearby fittings before declaring the leak safe, as sometimes the dripping comes from a joint and not from the body of the valve.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Biasi BI1141500 three-way valve.

Catalogue reference
BI1141500
Brand
Biasi
Type of part
3-way valves
Units in stock
3 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days
Frequently Asked Questions

Frequently asked questions about the 3-way valve BI1141500

Is this 3-way valve Ref. BI1141500 compatible with the MINOX range?
Yes, it is compatible with the MINOX 24 A and MINOX 24 E models.
Does the Biasi 3-Way Valve Ref. BI1141500 work with the MICON range?
Yes, it is compatible with the MICON 24 E model.
What material is the body of the Biasi 3-Way valve Ref. BI1141500 made of?
The body of the valve is made of brass.
How many models are compatible with the Biasi 3 Way Valve Ref. BI1141500?
There are a total of 3 confirmed models.
What is the reference for the Biasi 3-way valve?
The reference is V3VB24S.
Are there documented fault codes for this gas valve?
No, there are no documented fault codes for this product.
Entrega calculada por destinoDelivery time shown at checkout
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Biasi 3-Way Valve 24S Ref. BI1141500