Junkers Euroline ZW23 1 AE 23 S3705 Fime GR01725 Smoke Extractor Fan Ref. 8707204038
RefurbishedJunkersExtractors

Junkers Euroline ZW23 1 AE 23 S3705 Fime GR01725 Smoke Extractor Fan Ref. 8707204038

50 €VAT includedIn stock · 1 unit

Extractor: refurbished spare part that evacuates combustion gases with forced draft. Useful if it doesn't start due to draft failure, makes noise, or doesn't spin. Compatible with ZW23-1 AE, ZW24-1E LH AE (ref. 8707204038). Includes a one-year warranty and delivery within 2–4 working days in the EU.

1
Consult via WhatsApp
Delivery in 2–4 working days
1-year warranty
14-day return
Technical support

Key Data

Reference
8707204038
Brand
Junkers
Type of part
Extractors
Available units
1 unit in stock
Status
Refurbished
Warranty
1 year
Shipping
2–4 working days (EU)
Return
14 days

The same part (ref. 8707204038) equips these models. Verified compatibility; check the reference before purchasing.

Euroline

  • ZW23-1 AE
  • ZW24-1E LH AE

Fault codes related to this part (not the entire boiler). They usually have more possible causes: first rule out electrodes, wiring/connections, and gas supply. Verified with ≥3 sources.

CodeWhat does it mean?Cause and diagnosis (this part)
C1The pressure switch opens during operation, or the fan speed is too low.If the extractor fan does not reach the expected RPM or flow rate, the pressure switch opens during operation and triggers C1; check the power supply to the fan and the tachometric signal, and confirm that the pressure switch closes with the fan running and ducts clear.
C6The pressure switch does not close.A blocked/faulty fan or one with low flow does not generate the necessary depression and the air pressure switch does not close; check the fan start-up, closure of the pressure switch with a micromanometer, and the condition of the pressure switch/exhaust tubes.
CATurbine revolutions too high.Fan/tachometer fault causes the electronics to detect RPM out of range (excessive); verify actual RPM reading, tachometer wiring, and mechanical condition of the fan/extractor.
How do I know if this extractor/fan is the one for my boiler?
Verify the reference 8707204038 printed and ensure your model is on the list of compatible ones; also compare the connections with the original part. It is a Fime part.
What is it used for?
The extractor/fan evacuates the combustion gases (forced draught).
Does it not start due to a draught fault, make noise, or not spin?
Seized, noisy, or unpowered fan.
Which models is it suitable for?
Part shared by various models (see Compatibility). If your model does not appear, send us a photo of the marking and we will confirm it.
Installation and recommendations
Check the connector, the 230 V power supply, and free rotation.
What does refurbished mean and what coverage does it have?
Part removed from a boiler out of service, inspected and tested. Includes 1-year warranty and 14-day return policy. Delivery within 2–4 working days in the EU.

Related Spare Parts Boiler Euroline ZW23 1 AE 23 S3705 Fime GR01725

Scroll to the top