Chaffoteaux MC FF Flow Meter Ref. 60081471
The flow meter detects the passage of water when a tap is opened and commands the ignition to produce domestic hot water. If it fails, you will notice that no hot water comes out even though the tap is open, which may be indicated by fault code 50: Défaut débistat. This component is compatible with boilers from the Calydra, Centora, MC, Siam, and Nectra ranges, such as the Calydra 23, Centora 2.24, and MC FF models, among others. A technician must confirm through diagnosis whether it is necessary to replace it when you experience these symptoms of lack of hot water.
- Type of part
- Flow detectors
- Status
- Refurbished
- Catalogue reference
- 60081471
- Warranty
- 1 year
Chaffoteaux boilers compatible with reference 60081471
Flow meter with reference 60081471. 17 confirmed compatibilities: Calydra 23 and Calydra 28.
Verified compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Chaffoteaux Calydra 23 | CALYDRA | Verified |
| Chaffoteaux Calydra 28 | CALYDRA | Verified |
| Chaffoteaux Calydra Comfort 24 | CALYDRA | Verified |
| Chaffoteaux Calydra Comfort 28 | CALYDRA | Verified |
| Chaffoteaux Calydra 28 N | CALYDRA | Verified |
| Chaffoteaux Centora 2.24 | CENTORA | Verified |
| Chaffoteaux Centora 2.28 | CENTORA | Verified |
| Chaffoteaux Centora 3.24 | CENTORA | Verified |
| Chaffoteaux Centora Green | CENTORA | Verified |
| Chaffoteaux MC CF | MC | Verified |
| Chaffoteaux MC FF | MC | Verified |
| Chaffoteaux Siam 2.23 | SIAM | Verified |
| Chaffoteaux Siam 2.28 | SIAM | Verified |
| Chaffoteaux Siam 3.23 | SIAM | Verified |
| Chaffoteaux Nectra Top 2.23 | NECTRA | Verified |
| Chaffoteaux Nectra Top 2.28 | NECTRA | Verified |
| Chaffoteaux Nectra Top 3.23 | NECTRA | Verified |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the ref. 60081471 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 60081471. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the flow meter 60081471
The flow meter detects the passage of water to activate the domestic hot water. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
When opening the hot water tap, the boiler does not ignite to heat it.
Cause: The flow meter does not detect the flow of water and the control board does not receive the command to start the burner for domestic hot water.
Open the tap fully and check if the boiler starts with a higher flow; a low flow may not activate the sensor.
- 02
The hot water comes out in bursts, heating up and cooling down while the tap is running.
Cause: A flow meter that fails intermittently causes the boiler to turn the burner on and off without reason.
Check that the cold water inlet filter is not dirty; irregular pressure can simulate the same fault.
- 03
The boiler is displaying a fault code related to the flow sensor or domestic hot water.
Cause: The control unit detects an out-of-range signal from the flow meter and disables the hot water function for safety.
Note the exact code displayed on the screen before purchasing; several domestic hot water faults share the same generic warning.
- 04
There is a low flow of hot water even though the network pressure is normal.
Cause: The internal turbine of the flow meter may be stuck due to scale or dirt, resulting in a lower flow reading than actual.
Clean the filter of the cold water inlet before replacing the flow meter; often the problem is just dirt.
Chaffoteaux fault codes that require diagnosis
| Code | Fault | Technical checks |
|---|---|---|
| 50 | Flow sensor fault (defective flow meter). | The flow meter/flow switch gets stuck (open/closed) or does not switch, the PCB does not detect the flow start/stop and generates 50; check the continuity of the micro and the movement of the stem/magnet while opening a DHW tap or stopping the pump, and rule out any scaling or obstructions. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Flow meter data sheet Chaffoteaux 60081471
- Catalogue reference
- 60081471
- Uniclima internal SKU
- CCCMCFF
- Brand
- Chaffoteaux
- Type of part
- Flow detectors
- Units in stock
- 6 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Chaffoteaux MC CF Manual (PDF) Document © Chaffoteaux, provided as a technical reference.
Frequently asked questions about the flow meter 60081471
Does this flow meter work for a Nectra Top boiler?
How many pins does the flow meter connector of the Calydra Comfort have?
Is this flow meter compatible with the Centora range?
How many models are compatible with this flow meter?
What fault code is documented for this flow meter?
How can I ensure that the flow meter CCCMCFF is the correct one for my boiler?
