
Saunier Duval Isofast F28 E Hydraulic Group Pump Ref. 05720900
The Hydraulic Group Pump Saunier Duval Isofast F28 E is a component responsible for conducting and distributing water among the various circuits of the boiler. When it malfunctions, you may notice leaks, loss of pressure, or issues with the production of domestic hot water. This part is compatible with several Saunier Duval models, such as the Isofast F 28 E, Isofast F 28 E1, Isofast C 28 E, Isofast C 28 E1, Isomax F 28 E, and Isomax C 28 E, among others. It is recommended to replace the hydraulic group when these fault symptoms are detected.
VAT included
Consult via WhatsAppSaunier Duval boilers compatible with reference 05720900
Hydraulic group with reference 05720900. Six confirmed compatibilities: Isofast F 28 E and Isofast F 28 E1.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Saunier Duval Isofast F 28 E | Saunier Duval | Contrasted |
| Saunier Duval Isofast F 28 E1 | Saunier Duval | Contrasted |
| Saunier Duval Isofast C 28 E | Saunier Duval | Contrasted |
| Saunier Duval Isofast C 28 E1 | Saunier Duval | Contrasted |
| Saunier Duval Isomax F 28 E | Saunier Duval | Contrasted |
| Saunier Duval Isomax C 28 E | Saunier Duval | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the part number 05720900 is the correct one for your boiler.
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 05720900. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the hydraulic group 05720900 resolves.
The hydraulic group includes the valve, the by-pass, and the water connections. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The radiators are not heating or take a long time to do so even though the boiler starts.
Cause: The pump of the hydraulic group is not moving enough water, either due to wear or a blocked impeller.
Check if the pump vibrates or makes noise when starting; if it is completely silent, suspect that it is blocked.
- 02
The pump does not start or remains stopped after the summer without using the heating.
Cause: The rotor may have seized due to sediment buildup during the period of inactivity.
With the boiler cold, try to unlock the shaft with a flat screwdriver through the front slot.
- 03
Do you hear a buzzing or vibration in the area of the hydraulic group while the boiler is running?
Cause: There may be air in the circuit or a damaged impeller inside the unit.
Bleed the radiators and the circuit before concluding that the hydraulic group is faulty.
- 04
Do you see leaks or moisture under the boiler, near the hydraulic group?
Cause: The seals of the plastic body can lose tightness with temperature changes.
Dry the area and observe after a heating cycle to locate the exact point of the leak.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Hydraulic group data sheet Saunier Duval 05720900
- Catalogue reference
- 05720900
- Brand
- Saunier Duval
- Type of part
- Hydraulic units
- Units in stock
- 6 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days












