Beretta Conica 24 IE Electronic Module Ref. M 288 94 0012
RefurbishedBerettaPCBs (control boards)

Beretta Conica 24 IE Electronic Module Ref. M 288 94 0012

Stock · 2 units

The Beretta Conica 24 IE 288 94 0012 Electronic Module is the control PCB that manages the ignition, burner modulation, pump, and safety features of the boiler. If it malfunctions, the boiler may fail to start, lock out, or behave erratically. This module is compatible with Beretta boilers from the Conica 24 IE range, among others. It is advisable to replace it when these symptoms of malfunction are detected.

VAT included

Compatibility

Compatible Beretta boilers

PCB. A proven compatibility: Conica 24 IE M 288 94 0012.

Proven compatibility

Boiler modelFamilyVerification
Beretta Conica 24 IE M 288 94 0012BerettaContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if it is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference —. If it is not visible, do not identify the part by its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the PCB (control board) resolves

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler does not ignite, with no lights on.

    Cause: The transformer or the power supply stage of the module is not delivering the necessary 230V.

    Measure with the multimeter if 230V is reaching the input of the module before replacing it.

  • 02

    The boiler turns on briefly and then turns off, without heating.

    Cause: The microprocessor of the module turns off the ignition upon detecting an incorrect signal.

    Check if the flashing pattern of the indicator is always the same before replacing the part.

  • 03

    Nothing happens when pressing the reset button.

    Cause: The module does not process the reset command because its control circuit is unresponsive.

    Turn off and power cycle the boiler to force a reset before considering that the module is faulty.

  • 04

    The actuators, pump, or gas valve do not receive a signal to start.

    Cause: The relay outputs of the module stop functioning correctly over time.

    Listen for the relay clicking when calling for heat; if it doesn't click, the problem may be with the module.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Beretta control board data sheet

Brand
Beretta
Type of part
PCBs (control boards)
Units in stock
2 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Transformer voltage
230V, 50-60Hz
Frequently Asked Questions

Frequently asked questions about the PCB (control board)

What voltage does the transformer of this module support?
230V at 50-60Hz, as marked on the part.
Is this module compatible with other boilers besides the Beretta Conica 24 IE?
According to the available data, no; it is the only boiler indicated as compatible.

Spare parts related to Beretta Beretta

Entrega calculada por destinoDelivery time shown at checkout
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Beretta Conica 24 IE Electronic Module Ref. M 288 94 0012