Fontecal Miniplus 25 XER PCB Ref. R107062

Fontecal Miniplus 25 XER PCB Ref. R107062

Stock · 1 unit

The control PCB of the Fontecal Miniplus 25 XER manages the ignition, burner modulation, pump, and safety features of the boiler. When it fails, the boiler may not start, become locked, or behave erratically. This part is compatible with several models from the Fontecal Minitech and Minitech-Plus ranges, such as the Minitech-Plus 25 SER and the Minitech 30 XER, among others. It should be replaced when these malfunction symptoms occur.

VAT included

Compatibility

Fontecal boilers compatible with reference R107062

PCB with reference R107062. Eight confirmed compatibilities: Minitech 25 XER and Minitech 25 SER.

Proven compatibility

Boiler modelFamilyVerification
Fontecal Minitech 25 XERFontecal Minitech (V.02)Contrasted
Fontecal Minitech 25 SERFontecal Minitech (V.02)Contrasted
Fontecal Minitech 30 XERFontecal Minitech (V.02)Contrasted
Fontecal Minitech 30 SERFontecal Minitech (V.02)Contrasted
Fontecal Minitech-Plus 25 XERFontecal Minitech-Plus / Miniplus (V.02)Contrasted
Fontecal Minitech-Plus 25 SERFontecal Minitech-Plus / Miniplus (V.02)Contrasted
Fontecal Miniplus 25 XERFontecal Minitech-Plus / Miniplus (V.02)Contrasted
Fontecal Miniplus 30 XERFontecal Minitech-Plus / Miniplus (V.02)Contrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if the part number R107062 is the one for your boiler.

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference R107062. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the PCB R107062 resolves

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler control does not respond to anything, it neither turns on nor changes the temperature.

    Cause: The microcontroller on the PCB has stopped processing user commands.

    Check that the wiring from the control panel to the PCB is properly connected before replacing the PCB.

  • 02

    The boiler tries to ignite and shuts off after a few seconds, repeating the attempt unsuccessfully.

    Cause: The PCB controls the ignition and stops the process if it detects that something is not working as it should.

    Check the water pressure and the gas supply before blaming the PCB: if both are correct, the problem may be there.

  • 03

    A fault code is displayed and the boiler cannot be reset from the panel.

    Cause: The electronics are locked in safety mode and do not allow a reset even though there is no longer an original cause.

    Turn off the main power for a couple of minutes and turn it back on: if the manual reset does not work, the fault is in the PCB.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Fontecal R107062 PCB.

Catalogue reference
R107062
Brand
Fontecal
Type of part
PCBs (control boards)
Units in stock
1 unit
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Voltage
230V
Frequency
50-60Hz
Transformer assembly code
350.1A106
Frequently Asked Questions

Frequently asked questions about the PCB R107062

Does this PCB fit a Fontecal Miniplus 25 XER?
That model is not on the list of confirmed boilers for this part; the confirmed ones are Aqua 3S 25 ACS, Aqua 3S 30 ACS, and Miniplus Minitech.
What transformer code does the PCB of the Aqua 3S 30 ACS use?
350.1A106, according to what is read on the label; operates at 230V, 50-60Hz.
Entrega calculada por destinoDelivery time shown at checkout
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Fontecal Miniplus 25 XER PCB Ref. R107062