Saunier Duval SYMSI 6.0 PCB · 0310123100C3 for Isofast C 35 E1
Application for the exact variant pending confirmation. It is the Saunier Duval SYMSI 6.0 PCB; it is identified by its label 116010 F and its circuit code 0310123100C3.
- Type of part
- Saunier Duval
- Status
- Refurbished
- internal SKU
- PLC114
- Warranty
- 1 year
VAT included Stock · 2 units
Compatible Saunier Duval boilers
Saunier Duval. 0 confirmed compatibilities. There are 2 other models that we are still verifying.
Models pending verification
These models are associated with this reference, but we have not finished verifying them yet, so we do not consider them compatibleIf your boiler is one of them, send us a photo of the part you are going to replace and we will verify it before you purchase.
| Saunier Duval Isomax F 28 E2 | Saunier Duval | Unconfirmed |
|---|---|---|
| Saunier Duval Isofast C35 E1 (C 35 E1) | Saunier Duval | Unconfirmed |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if it is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Look for the code 116010 F (also written as 116010/F) and the marking SFL 01/01 on the label attached to the PCB.
- Check the silkscreen code on the circuit, 116322b-5197, and the circuit code 0310123100C3. They must match those on your PCB.
- Compare the connector layout with the photos and the version number SYMSI: this is 6.0.
- Check the model of your boiler on the rating plate: the Isofast C 35 E1 is registered and the Isomax F 28 E2 is mentioned (to be confirmed).
- if they match, call us at 911 17 77 77 with the model of your boiler. Any questions? Send us a photo of the label of your part and the data plate of the boiler from Contact.
Symptoms that require diagnosis in the Saunier Duval.
Common symptoms and faults
- 01
The boiler does not ignite: the room thermostat flashes with fault code 01 or 04.
Cause: The burner does not ignite or the flame is not detected. There may be a lack of gas.
Press the thermostat button and follow its instructions. If it appears again, have a technician check it.
Fault codes Saunier Duval that require diagnosis
| Code | Fault | Technical checks |
|---|---|---|
| F.28 | Start-up fault: ignition does not complete. | Code with a dot, typical of the Isofast Condens. It may be due to the gas, ignition, or the PCB; have a technician check it. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Saunier Duval
- Uniclima internal SKU
- PLC114
- Brand
- Saunier Duval
- Type of part
- Saunier Duval
- Units in stock
- 2 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Commercial reference
- 116010/F
- Label code
- 116010 F
- Additional marking of the attached label
- SFL 01/01
- Silkscreen code on the PCB
- 116322b-5197
- Marked supply voltage
- 230 V
- Voltage marked next to the fuse
- 250 V
- Integrated circuit reference (subcomponent)
- SDA 1586E
- Integrated circuit code (subcomponent)
- CS.0168
- Transformer code (subcomponent)
- SD44-B
- Source of additional data
- Declared information; auxiliary references and applications without equivalent from the accredited manufacturer.
- Inventory — Voltage marked on PCB
- V3V
- Inventory — Fuse
- 250 V; gauge not confirmed
- Inventory — CI subcomponent
- SDA 1586E; CS.0168
- Inventory — Marked code
- 116322b-5197; 116010 F; SFL 01/01; SD44-B
- Registered model
- SYMSI 6.0
- Identification and equivalences
- Label 116010 F common. Own SFL01/01 and denomination SYMSI6.0; offer SOK01 19. Plate code match, without confirmed mounting/program equivalence.
- Additional markings
- CI SDA 1586E and CS.0168. Screen-printed version SYMSI 6.0. The transcription retains "No SOFREL 0310123100C3". Other codes: 116322b-5197; 116010 F; SFL 01/01; SD44-B. Fuse marked 250 V, gauge unconfirmed.
- Pending applications to verify
- Saunier Duval ISOFAST C35 E1 — compatibility stated; pending contrast for variant.
Before purchasing
- To confirm: Saunier Duval Isomax F 28 E2 —
- To confirm: They are marked as read on the part itself. 0310123100C3 as Saunier Duval PCB for the Isomax F 28 E2. No official document available provides the catalog reference for Saunier Duval.
- Compatibility with the registered Isofast C 35 E1. Independents link the code 0310123100C3 with a Saunier Duval PCB; no official document records it.
- Pending registered applications to confirm by model, variant, or programming: Saunier Duval Isofast C35 E1 (C 35 E1).
Frequently asked questions: Saunier Duval
What is the Saunier Duval SYMSI 6.0 control board with the code 0310123100C3?
The compatibility of this variant is pending confirmation. To be confirmed: It is a Saunier Duval PCB, model SYMSI 6.0, with circuit code 0310123100C3, label 116010 F, and silkscreen 116322b-5197. Registered for the Isofast C 35 E1. They give the code 0310123100C3 as a Saunier Duval PCB.
Is it compatible with my Saunier Duval Isofast C 35 E1?
The compatibility of this variant is pending confirmation. Registered application: this PCB for the Isofast C 35 E1. Without additional external confirmation, it does not cite that model with the code nor provides the catalog reference from Saunier Duval, so compare the markings on the part with those on your PCB.
Is it compatible with the Saunier Duval Isomax F 28 E2?
The compatibility of this variant is pending confirmation. It is yet to be confirmed. They provide the code 0310123100C3 as the PCB for the Isomax F 28 E2, but that boiler is not confirmed. Compare the silkscreen 116322b-5197, or send us a photo of your PCB label and the characteristics plate from the Contact section.
Where is the code and which markings should I compare?
The attached label shows 116010 F (also 116010/F) and SFL 01/01. The circuit is screen printed with 116322b-5197 and the circuit code is 0310123100C3. It titles its “(V2)” and gives 116322b-5197 as the “Electronics Version.” The markings we have from our PCB do not include “V2” and without additional confirmation, it explains what changes between versions.
What do SDA 1586E, CS.0168, and SD44-B mean?
They are markings of the components on the PCB, not boiler references: SDA 1586E is the reference of the integrated circuit, CS.0168 is its code, and SD44-B is the code of the transformer. They are used to compare the PCB with yours.
What voltage and fuse does it require?
The board indicates a power supply of 230 V and 250 V next to the fuse. The fuse rating is not specified in the part data: check what is written on the fuse of your board before replacing it.
Who should install this PCB?
A qualified technician: the PCB operates with 230 V (marked supply voltage).
How to identify this PCB?
Compare the silkscreen, the distribution of the connectors, and the exact variant of the circuit with the photographs.
Saunier Duval SYMSI 6.0 PCB · 0310123100C3 for Isofast C 35 E1