Ferroli Divatop Low NOx F 32 Plate Heat Exchanger Ref. 39835830

Ferroli boilers compatible with reference 39835830

Plate heat exchanger with reference 39835830. Five confirmed compatibilities: Divatop Low NOx F24 and Divatop Low NOx F32.

Verified compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if the ref. 39835830 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 39835830. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis in the plate heat exchanger 39835830

The plate heat exchanger transfers heat to the domestic hot water. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  You turn on the hot water tap and cold or lukewarm water comes out, even though the heating is working fine.

  Cause: The plates of the heat exchanger are so scaled that they no longer transfer heat from the primary circuit to the domestic hot water.

  Check the set temperature of the domestic hot water on the panel and rule out another fault (three-way valve, domestic sensor) before confirming the embedding.

• 02

  You see dripping or moisture at the bottom of the boiler, right where the heat exchanger is mounted.

  Cause: A perforated plate or a degraded gasket allows water to pass between the primary circuit and the outside.

  Dry the area well and restart the boiler to locate the exact point of the leak before ordering the part.

• 03

  When opening the tap, a whistling sound is heard just as the hot water starts to flow out.

  Cause: The narrow passage between plates, if partially obstructed by scale, accelerates the water and generates that noise.

  Check the incoming water pressure and if the flow rate is normal in other taps in the house before attributing it to the heat exchanger.

• 04

  The heating works normally, but the hot water from the tap does not get heated.

  Cause: The plate heat exchanger is the only point where the primary circuit transfers heat to the domestic hot water; if it fails there, the heating system does not notice.

  Confirm on the display that the boiler enters domestic hot water mode when the tap is opened before ruling out the sensor as the cause.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Plate heat exchanger data sheet Ferroli 39835830

Catalogue reference

39835830

Uniclima internal SKU

IPDLNF32

Brand

Ferroli

Type of part

Plate heat exchanger

Units in stock

6 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Material

Copper (plates)