Hermann Saunier Duval Micraplus Domestic Plate Heat Exchanger Ref. 00201861
If you notice that the domestic hot water comes out lukewarm or with fluctuating temperature, a technical diagnosis must confirm if you need the Heat Exchanger Plates Sanitary Hermann Saunier Duval Micraplus Ref. 00201861. This component transfers heat from the primary circuit to the hot water instantly. It is installed in boilers from the Saunier Duval Micraplus range, among others. A technician must confirm through diagnosis if it is necessary to replace it when you experience temperature or flow issues with the hot water.
- Type of part
- Plate heat exchanger
- Status
- Refurbished
- Catalogue reference
- 00201861
- Warranty
- 1 year
Hermann boilers compatible with reference 00201861
Plate heat exchanger with reference 00201861. A proven compatibility: Duval Micraplus.
Verified compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Hermann Duval Micraplus | Saunier | Verified |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the reference 00201861 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 00201861. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the plate heat exchanger 00201861
The plate heat exchanger transfers heat to the domestic hot water. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
Little hot water is coming out, or the temperature fluctuates for no reason at the faucet.
Cause: The plates get clogged with limescale and reduce the flow rate that the heat exchanger can heat.
Check the flow of the domestic hot water tap at maximum: if it is low compared to the cold water, suspect obstruction before replacing the part.
- 02
The hot tap water comes out cloudy or with a strange smell.
Cause: A crack between the plates can allow water to pass from one circuit to another.
Check if you notice any color or smell of product from the heating circuit in the domestic hot water, and if you have to refill the pressure more often than usual.
- 03
The boiler heats the radiators well, but the domestic hot water does not reach the set temperature.
Cause: When the plates are embedded, the heat exchange to the domestic hot water circuit loses efficiency.
Increase the setpoint temperature of the domestic hot water and check if there is any improvement: a partial improvement suggests scaling in the heat exchanger.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Plate heat exchanger sheet Hermann 00201861
- Catalogue reference
- 00201861
- Uniclima internal SKU
- IPCMC25A
- Brand
- Hermann
- Type of part
- Plate heat exchanger
- Units in stock
- 2 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Number of PCBs
- 12
Frequently asked questions about the plate heat exchanger 00201861
Does this 12-plate heat exchanger fit a Saunier Duval Micraplus?
How many plates does this heat exchanger of the Saunier Duval Micraplus have?
When should the heat exchanger of the Micraplus be replaced?
What is the function of this heat exchanger in the Saunier Duval Micraplus?
