Pressure Gauge Baxi Roca RS 20 20 Ref. 122155350
RefurbishedBaxi RocaPressure gauges & aquastats

Pressure Gauge Baxi Roca RS 20 20 Ref. 122155350

Stock · 6 units

The Roca RS 20 20 Pressure Gauge, reference 122155350, is a device that measures and controls the pressure of the circuit in the boiler. If it malfunctions, you will notice incorrect readings that may cause the boiler to lock due to a false lack of pressure or poor temperature regulation. This pressure gauge is compatible with models from the Roca RS-20/20, Roca R-20/20, and Roca R-30/30 ranges, among others. It is recommended to replace it when the readings are not accurate or the boiler has pressure issues.

VAT included

Compatibility

Baxi Roca boilers compatible with reference 122155350

Pressure gauge with reference 122155350. 11 verified compatibilities: RS-20/20 and RS-20/20F.

Proven compatibility

Boiler modelFamilyVerification
Baxi Roca RS-20/20Baxi Roca RS-20/20Contrasted
Baxi Roca RS-20/20FBaxi Roca RS-20/20Contrasted
Baxi Roca RS-20/20TBaxi Roca RS-20/20Contrasted
Baxi Roca RSI-20/20Baxi Roca RS-20/20Contrasted
Baxi Roca R-20/20Baxi Roca R-20/20Contrasted
Baxi Roca R-20/20FBaxi Roca R-20/20Contrasted
Baxi Roca R-20/20PBaxi Roca R-20/20Contrasted
Baxi Roca R-20/20TBaxi Roca R-20/20Contrasted
Baxi Roca R-30/30Baxi Roca R-30/30Contrasted
Baxi Roca R-30/30FBaxi Roca R-30/30Contrasted
Baxi Roca R-30/30PBaxi Roca R-30/30Contrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if the reference 122155350 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 122155350. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the pressure gauge 122155350 resolves.

The manometer shows the pressure of the boiler circuit. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The needle does not move even if you bleed air or recharge pressure in the circuit.

    Cause: The internal bourdon is jammed or blocked, which usually happens when scale enters through the brass fitting.

    Bleed the highest radiator properly and check if the circuit responds; if the water moves normally but the needle does not, the fault is with the manometer.

  • 02

    There is a water leak dripping from the thread where the pressure gauge is connected.

    Cause: The gasket or brass fitting has degraded over time and no longer seals properly against the body of the boiler.

    Check if tightening the fitting slightly with a wrench, without forcing it, stops the leak; if it continues to drip after tightening, the problem may be just with the gasket.

  • 03

    The plastic body is cracked or broken and the fitting is no longer securely attached.

    Cause: The plastic ages with the heat and vibrations of the boiler and ends up cracking around the thread.

    Check if the crack affects only the outer casing or also the internal mechanism; with the broken body, it is common that no repair is possible.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the pressure gauge Baxi Roca 122155350

Catalogue reference
122155350
Brand
Baxi Roca
Type of part
Pressure gauges & aquastats
Units in stock
6 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Pressure gauge
0-4 bar
Body
Black plastic
Connection fitting
Threaded, brass
Frequently Asked Questions

Frequently asked questions about the pressure gauge 122155350

Does this pressure gauge Roca work for the boiler RS-20/20F?
Yes, the RS-20/20F is on the list of boilers compatible with this pressure gauge Baxi Roca RS 20 20, reference MPRRS2020.
What pressure scale does the manometer of the Baxi Roca R-20/20 have?
The pressure gauge has a pressure scale ranging from 0 to 4 bar, with a black plastic body and a brass threaded fitting.
When should the pressure gauge of the Baxi Roca RS-20/20 boiler be replaced?
It should be replaced when the needle gets stuck or a leak appears in the connection.
How many models are compatible with the Baxi Roca RS 20 20 pressure gauge?
This manometer is compatible with a total of 11 models from the Baxi Roca RS-20/20, Baxi Roca R-20/20, and Baxi Roca R-30/30 ranges.
What is the reference for the pressure gauge Baxi Roca?
The reference for the pressure gauge Baxi Roca is MPRRS2020.

Spare parts related to Baxi Roca RS-20/20

Entrega calculada por destinoDelivery time shown at checkout
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Pressure Gauge Baxi Roca RS 20 20 Ref. 122155350