Ariston Basic 23 MFFI Safety Valve Ref. 569292

Ariston Basic 23 MFFI Safety Valve Ref. 569292

Stock · 6 units

The Ariston BASIC boilers are compatible with the Ariston Basic 23 MFFI safety valve. This valve has the function of releasing water when the circuit pressure exceeds 3 bar, thus protecting the system from overpressure. When it fails, you may notice continuous dripping or that it does not discharge properly when required. It is installed in models such as BASIC 23, BASIC 23 MFFI, among others in the BASIC range and others like CODEX and EDI. It is recommended to replace it if you observe these symptoms to avoid damage to the boiler.

VAT included

Compatibility

Ariston boilers compatible with reference 569292

Safety valve with reference 569292. Five confirmed compatibilities: BASIC 23 and BASIC 23 MFFI.

Proven compatibility

Boiler modelFamilyVerification
Ariston BASIC 23Ariston BASICContrasted
Ariston BASIC 23 MFFIAriston BASICContrasted
Ariston CODEX 23Ariston CODEXContrasted
Ariston EDI 23Ariston EDIContrasted
Ariston GENOS 23 RAriston GENOSContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if the reference 569292 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 569292. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the safety valve 569292 resolves.

The safety valve releases pressure when the circuit exceeds its setting. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    It continuously drips from the gas valve drain, even after being bled.

    Cause: The closing seat does not seal properly and allows water to pass through continuously.

    Manually bleed by turning the cap and releasing: if the dripping does not stop when closing, the seat is worn.

  • 02

    The boiler does not maintain pressure and needs to be refilled frequently.

    Cause: A silent leak from the valve seat is draining the circuit.

    With the pressure gauge in view, note the cold pressure for a couple of days; if it drops without visible leaks in the radiators, suspect the gas valve.

  • 03

    The valve activates and releases water without the pressure reaching 3 bar.

    Cause: The adjustment spring has lost strength and opens earlier than it should.

    Check the pressure gauge to see at what exact pressure water starts to come out; if it is clearly below 3 bar, the setting has failed.

  • 04

    There is a dry limescale stain under the boiler, next to the drain pipe.

    Cause: It is a trace of intermittent bleeds that have dried up without anyone noticing.

    Check if the stain reappears wet after a heating cycle; confirm that the leak is still active before purchasing the part.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Ariston safety valve 569292

Catalogue reference
569292
Brand
Ariston
Type of part
Safety valves
Units in stock
6 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

fool
3 bar
connection
1/2" male, with connection for manometer/hydrometer of 1/4"
Before purchasing
  • The equivalence "Ariston 1.1455 / CHV0VS10" only has one source and is not included as confirmed data.
Documentation

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

Frequently Asked Questions

Frequently asked questions about the safety valve 569292

What pressure is the safety valve Ref. 569292 of the Ariston Basic 23 MFFI set to?
At 3 bar.
What connection does this safety valve for the Ariston Genus 23 have?
1/2" male connection, with a port for a pressure gauge or manometer of 1/4".
Is the valve Ref. 569292 suitable for an Ariston Edi 23?
Yes, the Edi 23 is on the list of boilers compatible with this gas valve.
When should the safety valve of the Ariston Codex 23 be replaced?
It is replaced when it leaks continuously, does not close properly, or loses tightness.

Spare parts related to Ariston Ariston BASIC

Entrega calculada por destinoDelivery time shown at checkout
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Ariston Basic 23 MFFI Safety Valve Ref. 569292