
Chaffoteaux MC 2 24 FF Filling Safety Valve Ref. 60081978
The safety valve releases water if the circuit pressure exceeds the usual limit of 3 bar. If it fails, it may exhibit continuous dripping or not discharge when necessary, which can cause problems in the operation of the boiler. This part is compatible with models such as Elexia Comfort 24 CF, Elexia Comfort 24 FF, Maya 24 CF, Maya 24 FF, Maya 28 FF, MC2 24 CF, and MC2 24 FF, among others. It is recommended to replace it when these symptoms are detected to avoid further damage.
VAT included
Consult via WhatsAppChaffoteaux boilers compatible with reference 60081978
Safety valve with reference 60081978. Seven confirmed compatibilities: Elexia Comfort 24 CF and Elexia Comfort 24 FF.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Chaffoteaux Elexia Comfort 24 CF | Elexia Comfort | Contrasted |
| Chaffoteaux Elexia Comfort 24 FF | Elexia Comfort | Contrasted |
| Chaffoteaux Maya 24 CF | Maya | Contrasted |
| Chaffoteaux Maya 24 FF | Maya | Contrasted |
| Chaffoteaux Maya 28 FF | Maya | Contrasted |
| Chaffoteaux MC2 24 CF | MC2 | Contrasted |
| Chaffoteaux MC2 24 FF | MC2 | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 60081978 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 60081978. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the safety valve 60081978 resolves.
The safety valve releases pressure when the circuit exceeds its setting. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The dripping starts just when the boiler heats water and stops when it cools down.
Cause: The water expands when heated and seeks an outlet because the expansion vessel does not compensate for it.
Check the air pressure of the expansion vessel with the boiler cold before changing the gas valve: it is often the real source.
- 02
The pressure rises significantly on the manometer and the valve does not trigger.
Cause: The seat or the spring can become stuck if the valve has not operated for a while.
If it has a cap or manual bleed lever, operate it a couple of times to try to release it before replacing it.
- 03
There is moisture on the thread of the gas valve, but the discharge pipe is dry.
Cause: The leak is not a safety shot, but a gasket or joint that has lost tightness in the body of the gas valve.
Dry the area and tighten the joint carefully: if moisture reappears right there, the part to be replaced is the gas valve.
- 04
A puddle appears under the boiler intermittently, some days yes and others no.
Cause: The dripping goes back and forth depending on the actual pressure of the circuit at each moment, typical of a seat that does not close completely.
Note the pressure on the manometer on the days it drips and the days it doesn't: if it coincides with high pressure, confirm that it is the gas valve.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Chaffoteaux safety valve 60081978
- Catalogue reference
- 60081978
- Brand
- Chaffoteaux
- Type of part
- Safety valves
- Units in stock
- 7 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days



