Ferroli Bluehelix Hitech RRT 28 C boiler
Condensing boiler · New equipmentFerroli Bluehelix Hitech RRT 28 C
New boiler Ferroli Condensing boilers

Ferroli Bluehelix Hitech RRT 28 C boiler

Heating and hot water for everyday use, combined in a gas boiler.

Gas
Natural / propane Professional configuration
Wi-Fi
Optional CONNECT Smart WiFi
Heating
24 kW 80/60 °C
Domestic hot water flow rate
16.1 / 13.4 l/min ΔT 25/30 °C
Gas and Wi-Fi: compatibility and accessories

Gas and conversion: The manufacturer documents natural gas G20 and propane G31. It is necessary to verify the supply configuration and adapt the appliance to the gas of the installation. Compatibility with butane G30 is not offered without explicit documentation of this version. The conversion and commissioning are the responsibility of a qualified professional; they are not included in the purchase. Source 1 ↗

Wi-Fi and supply: CONNECT Smart WiFi (013011XA) is listed as a compatible accessory, not as standard equipment. Do not confuse OpenTherm compatibility with the included Wi-Fi module. Source 1 ↗

Description

Ferroli combines home heating and hot water for taps and showers. When choosing it, both water usage and heating needs are important: a home with multiple showers running at the same time requires a different assessment.

Domestic hot water is prepared when you turn on the tap, without an integrated storage tank. It is important to check how many water points you will use at the same time and the available space to replace the boiler.

Guide for this modelDoes your boiler show an error?Ferroli Bluehelix Hitech RRT 28 CSee codes
Guide

What to check before installing this boiler

The choice of equipment does not replace the inspection of the installation by a qualified professional.

  1. Confirm the model and commercial reference, the type of gas, and the supply configuration in the manufacturer's documentation.
  2. Ask a qualified installer to assess the heating and domestic hot water demand; compare measured flow rates at the same temperature difference.
  3. Check dimensions, connections, flue gas evacuation, condensate drainage, and controls compatible with the existing installation.
  4. Confirm the included accessories and the delivery time before scheduling the installation. The online purchase of the equipment does not include installation or commissioning.
Technical data

Technical data of Ferroli Bluehelix Hitech RRT 28 C boiler

Brand
Ferroli
Model
Ferroli Bluehelix Hitech RRT 28 C boiler
Status
New
Supply scope
With standard flue kit. Installation, fittings, and Connect control not included.
Shipping
Included in mainland Spain. Please confirm the deadline.
Commercial reference
695S00284

Specifications and dimensions of the model

Compare each magnitude under its testing conditions: heating, domestic hot water, efficiency, and dimensions.

Gas
G20 20 mbar; G31 37 mbar
Dimensions and connections
Dimensions (height × width × depth)
700 × 420 × 320 mm
Dimensions and connections
Useful heating thermal power 80/60 °C
24 kW
Heating
Useful heating thermal power 50/30 °C
26 kW
Heating
Maximum thermal power for domestic hot water
28 kW
Hot water
Domestic hot water flow rate (ΔT 25/30 °C)
16.1 / 13.4 l/min
Hot water
Type of domestic hot water
Instantaneous production with plate heat exchanger
Hot water
Heating / domestic hot water power output
70 / 82 W
Manufacturer's PDF, page 2
Maximum / minimum gas flow G20
3.02 / 0.37 m³/h
Manufacturer's PDF, page 2
Heating class without Connect
A
Manufacturer's PDF, page 2
Manufacturer's sources

PDF and documentation of the model

Original documents, unmodified. Refer to the installation plan and the conditions of each data point before selecting the equipment.

The gallery sheets are summaries of Uniclima based on these documents. The external volume diagram does not represent connections, accessories, or service distances.

Frequently asked questions

Frequently asked questions: condensing boilers 695S00284

Is it suitable for a 150 m² house?
The surface area alone does not determine the model. For example, a calculated demand of 80 W/m² in 150 m² requires 12 kW, within the range of 3.4 to 24 kW at 80/60 °C. That assumption should be replaced by the actual load of the home; it is not a recommendation of square meters from the manufacturer. The choice against the 24 C may come from the higher flow rate of domestic hot water.
What improvement in hot water compared to the 24 C?
At a ΔT of 30 °C, it delivers 13.4 l/min compared to 11.7 l/min at 24 °C: 1.7 l/min more. At a ΔT of 25 °C, it goes from 14 to 16.1 l/min. It maintains the same dimensions, but it does not convert any installation of two bathrooms into a system suitable for two simultaneous showers.
Can it supply two showers at 8 l/min?
At 35 °C, it reaches 16.1 l/min from 10 °C, but at 40 °C it drops to 13.4 l/min; for two showers of 8 l/min at 40 °C, it is insufficient. The inlet and outlet temperatures are an example that applies the declared flow rates at ΔT 25 and 30 °C; the available pressure and flow must also be checked.
Does it have a domestic hot water accumulator?
Produces instantaneous domestic hot water using a plate heat exchanger, without a storage water heater. The expansion vessel belongs to the heating circuit and is not equivalent to a domestic hot water accumulator.
What are its dimensions?
The body measures 700 × 420 × 320 mm (height × width × depth). Space must also be reserved for connections, drainage, support, and maintenance.
What gases does it accept?
The technical sheet identifies G20 at 20 mbar and G31 at 37 mbar. The configuration, conversion if applicable, commissioning, and checks must be carried out by authorized professionals.
Does the price include installation and shipping?
Includes VAT and shipping to mainland Spain. Installation and adaptations are valued separately. With standard flue kit. Installation, fittings, and Connect control not included.
Shipping to the mainland included
New equipment
Separate installation
Informed purchase
Ferroli Bluehelix Hitech RRT 28 C boiler