Vaillant Aquablock Flue Extractor Fan VMI 32 362 7 Ref. 190262
Extractor: reconditioned spare part that evacuates combustion gases with forced draft. Useful if it doesn't start due to draft failure, makes noise, or doesn't spin. Compatible with VMI 32/362-7, VMI 32/362-7 R3, VMW ES 28/362-5 (ref. 190262). Includes a one-year warranty. Delivery time and cost are shown at checkout for the destination country.
- Type of part
- Extractor fans
- Status
- Refurbished
- Catalogue reference
- 190262
- Warranty
- 1 year
Vaillant boilers compatible with reference 190262
Extractor with reference 190262. Five confirmed compatibilities: VMI 32/362-7 and VMI 32/362-7 R3.
Verified compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Vaillant VMI 32/362-7 | VMI (turbo) | Verified |
| Vaillant VMI 32/362-7 R3 | VMI (turbo) | Verified |
| Vaillant VMW ES 28/362-5 | VMW ES | Verified |
| Vaillant VMW 32/362/3-5 RV | VMW ES | Verified |
| Vaillant VMW 32/362/3-5 RV R2 | VMW ES | Verified |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the reference 190262 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 190262. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the extractor 190262
The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:
Vaillant fault codes that require diagnosis
| Code | Fault | Technical checks |
|---|---|---|
| F.32 | Fan fault. | The flue gas extractor does not start or rotates out of tolerance (Hall sensor/tachometer without signal), so the electronics detect a fault. Verify 230 V and neutral at the fan connector and the rpm/Hall signal in diagnostics; check that it reaches the target rpm without friction or obstructions. |
| F.33 | The air pressure switch does not activate (does not switch). | If the extractor fan does not generate sufficient depression in the venturi, the pressure switch does not switch and the boiler locks out. Check depression with a manometer in the venturi while the fan is running and confirm that the pressure switch switches; if not, check/replace the fan and hoses. |
| F.37 | Divergence of the operating fan's number of revolutions. | The extractor fan reports rpm that are too high or too low compared to the target value due to a fault in the motor/control itself (bearings, Hall, wiring), causing inconsistency. Check in fan test mode the actual rpm vs. setpoint and the Hall signal; inspect power supply/wiring and replace the fan if it does not maintain stability. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Vaillant 190262 extractor.
- Catalogue reference
- 190262
- Uniclima internal SKU
- ECAVMI362
- Brand
- Vaillant
- Type of part
- Extractor fans
- Units in stock
- 0 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Frequently asked questions about the extractor 190262
What does it do?
Does it not start due to a draught fault, make noise, or not spin?
Which models is it suitable for?
Installation and recommendations
What does refurbished mean and what coverage does it have?
