Filling Key Fagor Contract CE 20E 1N Ref. MU1284700
RefurbishedFagorFilling valves

Filling Key Fagor Contract CE 20E 1N Ref. MU1284700

Stock · 4 units

The Fagor Contract CE 20E 1N Filling Valve Ref. MU1284700 is a ball valve designed to replenish water to the heating circuit and recover pressure. If it malfunctions, the user will notice that the circuit cannot be refilled or that it is continuously leaking water, which can lead to an increase in pressure. This part is compatible with Fagor boilers from the FE range, such as the FE 24 NOX model, as well as from the FA and CA ranges, including models like FA20E2N and CE20E. It should be replaced when leaks or difficulties in refilling the circuit are detected.

VAT included

Compatibility

Fagor boilers compatible with reference MU1284700

Filling key with reference MU1284700. Five confirmed compatibilities: FE 24 NOX and FA20E2N.

Proven compatibility

Boiler modelFamilyVerification
Fagor FE 24 NOxFagor FEContrasted
Fagor FA20E2NFagor FAContrasted
Fagor FA23EFagor FAContrasted
Fagor CA24ENFagor CAContrasted
Fagor CE20EFagor CEContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. MU1284700 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference MU1284700. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the filling valve MU1284700 resolves.

The filling valve allows water to refill the heating circuit. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    When opening the valve to recharge pressure, the pressure gauge rises very slowly or almost not at all.

    Cause: The internal ball-type sphere is blocked by lime or dirt residues from the circuit.

    Open and close several times and see if you notice more resistance than normal when turning or if the water flow is weak.

  • 02

    Lime deposits or moisture appear around the body of the valve.

    Cause: It usually indicates that there has been a small and constant drip for some time, even if it goes unnoticed.

    Completely dry the area and check it again several hours later to confirm if the moisture reappears.

  • 03

    The pressure in the circuit drops slowly but continuously, day after day.

    Cause: The valve does not close completely watertight and gradually lets water seep into the boiler.

    Close the valve completely and monitor the pressure gauge for several hours to see if the pressure drop stops.

  • 04

    The handle is difficult to turn or has broken when trying to do so.

    Cause: The material of the handle becomes brittle over the years and due to proximity to heat.

    Turn it carefully, without forcing it, to check if it responds or if it's already broken inside.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Fiche of the filling key Fagor MU1284700

Catalogue reference
MU1284700
Brand
Fagor
Type of part
Filling valves
Units in stock
4 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Type
Ball valve
Body finish
Nickel plating
Handle
Dark blue plastic
Frequently Asked Questions

Frequently asked questions about the filling key MU1284700

Is this ball-type filling valve suitable for the Fagor CE 20 E-1 N boiler?
Yes, the CE 20 E-1 N is on the list of compatible boilers.
What does the filling valve of the CE 20 E-1 N boiler look like physically?
It is a ball type, with a nickel-plated body and a dark blue plastic handle, as seen in the available photos.
Is this same filling key also suitable for the Fagor FA 20 E2 boiler?
Yes, the FA 20 E2 is on the list of compatible boilers, along with other CA, CE, FA, and FE models from the same range.

Spare parts related to Fagor Fagor FA

Entrega calculada por destinoDelivery time shown at checkout
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Filling Key Fagor Contract CE 20E 1N Ref. MU1284700