Manual Filling Valve for Isofast Condens F30 E – Ref. S1007000

Hermann boilers compatible with reference S1007000

Filling key with reference S1007000. 23 verified compatibilities: C24E and C25E.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. S1007000 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference S1007000. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis in the filling valve S1007000

The filling valve allows water to refill the heating circuit. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  Water leaks from the valve when opening or closing the blue handle.

  Cause: The internal gasket of the plastic control has lost its sealing, which is common in these valves after several years of use.

  Close the control fully and dry the area; if the dripping only occurs when operating it, check that the control reaches the closing stop.

• 02

  The boiler loses pressure and the circuit needs to be refilled frequently.

  Cause: The filling valve only operates during the refilling process, so a continuous loss indicates a leak in the circuit or the expansion vessel.

  Close it properly after refilling and check if the pressure drops again in a few days without anyone touching the valve.

• 03

  The blue knob is broken or very difficult to turn.

  Cause: Being a plastic piece, the control is more fragile than a metal one and will break if forced when seized by limescale.

  If it turns with difficulty, try short movements without forcing it; if it's already broken, check if the inner shaft still turns before replacing the entire assembly.

• 04

  After refilling, the valve doesn't close completely and water keeps flowing.

  Cause: The internal closing seat does not fit well, due to plastic wear or lime trapped in the mechanism.

  Turn the knob to the fully closed position and check if the flow stops completely before considering the key as faulty.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Fiche of the filling key Hermann S1007000

Catalogue reference

S1007000

Uniclima internal SKU

LLCHRNN24

Brand

Hermann

Type of part

Filling valves

Units in stock

3 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Body material

Plastic, black color

Control board

Blue color