Ferroli Domina F24E PCB Ref. 39807680

Ferroli Domina F24E PCB Ref. 39807680

70 €VAT includedOUT OF STOCK

The control PCB governs the ignition, burner modulation, pump, and safety features of the boiler. If it fails, the boiler may not start, lock out, or behave erratically. This part, manufactured by Honeywell and with the reference 39807680, is compatible with several Ferroli models, including the Domina Oasi F24E and the Domitop HF 24E, among others. It is recommended to replace it when there are operational issues or abnormal behavior of the boiler.

Compatibility

Ferroli boilers compatible with reference 39807680

PCB with reference 39807680. Ten verified compatibilities: Domina Oasi F24E and Domina Oasi F30E.

Proven compatibility

Boiler modelFamilyVerification
Ferroli Domina Oasi F24EFerroli Domina OasiContrasted
Ferroli Domina Oasi F30EFerroli Domina OasiContrasted
Ferroli Domina Oasi C24EFerroli Domina OasiContrasted
Ferroli Domina Oasi C30EFerroli Domina OasiContrasted
Ferroli Domina Oasi F24Ferroli Domina OasiContrasted
Ferroli Domina Oasi F30Ferroli Domina OasiContrasted
Ferroli Domitop HF 24EFerroli DomitopContrasted
Ferroli Domitop HF 30EFerroli DomitopContrasted
Ferroli Domitop HC 24EFerroli DomitopContrasted
Ferroli Domitop HC 30EFerroli DomitopContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 39807680 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 39807680. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the PCB 39807680 resolves.

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler is completely dead: no indicator lights turn on and it doesn't respond to the thermostat.

    Cause: If the main PCB fails, the boiler loses general control and does not respond to any commands.

    Check the fuse on the PCB and the power supply of the boiler; a blown fuse causes exactly this symptom.

  • 02

    The display shows a fault code that does not correspond to any external component already checked.

    Cause: A code without a clear external cause usually indicates that the fault lies in the electronic management of the PCB.

    Compare the code with the Ferroli manual for this range before deciding on the replacement.

  • 03

    The boiler ignites but turns off by itself after a few seconds or minutes.

    Cause: The PCB manages the ignition and safety sequence; if it misinterprets a signal, it cuts off the supply even if the rest of the equipment is functioning properly.

    First, rule out a fault with the temperature sensor or water pressure sensor, as they cause the same symptom without the PCB being faulty.

  • 04

    The remote control or the thermostat cannot change anything on the boiler.

    Cause: If the PCB does not process the commands it receives properly, the boiler stops responding even though the control works correctly.

    Test the thermostat or control on another unit if possible, to rule out that the fault is there and not in the PCB.

Fault codes for Ferroli that this part resolves.

CodeFaultDiagnosis and solution
F50Anomaly in the DBM32 control boardA fault has been detected in the DBM32 control board. This may affect the control and regulation of the boiler. If you notice that the boiler is not regulating the temperature properly, the issue could be with the PCB.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Ferroli PCB 39807680

Catalogue reference
39807680
Brand
Ferroli
Type of part
PCBs (control boards)
Units in stock
0 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days
Frequently Asked Questions

Frequently asked questions about the PCB 39807680

Is this PCB suitable for a Ferroli Domitop HF 24?
Yes, the Domitop HF 24 is on the list of compatible boilers.
Is this PCB also suitable for a Ferroli Noxia NF 30/55?
Yes, the Noxia NF 30/55 is listed as a compatible boiler.

Spare parts related to Ferroli Ferroli Domina Oasi

Entrega calculada por destinoDelivery time shown at checkout
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Ferroli Domina F24E PCB Ref. 39807680