PCB for Boiler Domina Igloo F24E - Ref. 39808010

PCB for Boiler Domina Igloo F24E - Ref. 39808010

Stock · 1 unit

The PCB for the Domina Igloo F24E boiler is the component that controls the ignition, burner modulation, pump, and safety features of the boiler. When this part fails, the boiler may not start, become locked, or operate erratically, presenting faults such as F50 and F51. This board is compatible with several models, such as Domina Igloo F24E, Domitop DGT F24E, among others. It is recommended to replace it in case of faults or unusual behavior of the boiler.

VAT included

Compatibility

Ferroli boilers compatible with reference 39808010

PCB with reference 39808010. Eight confirmed compatibilities: Domina Igloo F24E and Domitop DGT F24E.

Proven compatibility

Boiler modelFamilyVerification
Ferroli Domina Igloo F24EDomina IglooContrasted
Ferroli Domitop DGT F24EDomitop / Domitop DGTContrasted
Ferroli Domitop DGT F30EDomitop / Domitop DGTContrasted
Ferroli Domina F24EDominaContrasted
Ferroli Domina F30EDominaContrasted
Ferroli Ferella FreeFerellaContrasted
Ferroli Ferella Gold DGTFerellaContrasted
Ferroli Ferella F24EFerellaContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 39808010 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 39808010. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the PCB 39808010 resolves.

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler does not turn on, it does not respond to anything, neither lights nor display.

    Cause: A fault in the PCB prevents it from powering or controlling the rest of the components.

    Check the fuse on the PCB and verify that power is reaching the boiler before considering that the board is faulty.

  • 02

    The display shows a fault code that doesn't disappear even after performing a reset.

    Cause: The control electronics detect an internal or communication fault and lock the boiler for safety.

    Note the exact code displayed and perform a complete reset by cutting off the power for a few minutes.

  • 03

    The remote control or the thermostat do nothing even though the boiler has power.

    Cause: The PCB does not process the signal from the peripherals correctly due to a fault in its communication circuits.

    Check that the wiring of the thermostat or the communication bus is properly connected and without breaks.

Fault codes for Ferroli that this part resolves.

CodeFaultDiagnosis and solution
F50Internal control board errorAn internal error has occurred in the DBM32 control board. This may affect the operation of the boiler. It is advisable to check the control board to identify the problem.
F51Internal control board errorIndicate an internal error in the DBM32 control board. Check its status and operation, as it may affect the performance of the boiler.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Ferroli 39808010 PCB.

Catalogue reference
39808010
Brand
Ferroli
Type of part
PCBs (control boards)
Units in stock
1 unit
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days
Documentation

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

Frequently Asked Questions

Frequently asked questions about the PCB 39808010

Is this PCB suitable for a Domina Igloo F24E boiler?
Yes, it is on the compatibility list for this PCB, along with Domina F24-30 E, F24E, F30E, and the Domitop DGT C24E, DGT F24, and DGT F30.
How do I check if this PCB is the one for my boiler?
Checking that your boiler model is on the compatibility list (Domina/Domitop indicated); reference 39808010 is the one used in the catalog today, not a confirmed reading from the text on the PCB.
Is it the same PCB for the Domina F24E and the Domitop DGT F30?
Both models appear on the same compatibility list for this PCB, with no version distinction between them in the available material.

Spare parts related to Ferroli Ferella

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
PCB for Boiler Domina Igloo F24E - Ref. 39808010