Zilmet Plate Heat Exchanger for Heatline Capriz 25 and Compatible Models
The Zilmet plate heat exchanger for Heatline Capriz 25 and compatible models transfers heat from the primary circuit to the domestic hot water instantly. When it fails, the water comes out lukewarm or shows fluctuating temperatures, and the flow of hot water is also reduced. This model is compatible with boilers from the Capriz, Compact, Hydroline, and Vizo ranges, among others. A technician must confirm through diagnosis whether the spare part needs to be replaced when these symptoms are noticed to ensure an adequate supply of hot water.
- Type of part
- Plate heat exchanger
- Status
- Refurbished
- Catalogue reference
- 3003200026
- Warranty
- 1 year
Airsol boilers compatible with reference 3003200026
Plate heat exchanger with reference 3003200026. Six confirmed compatibilities: 25 and C24.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Airsol 25 | Capriz | Contrasted |
| Airsol C24 | Capriz | Contrasted |
| Airsol C24 | Compact | Contrasted |
| Airsol S24 | Compact | Contrasted |
| Airsol B24 | Hydroline | Contrasted |
| Airsol 24 | Vizo | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 3003200026 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 3003200026. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the heat exchanger 3003200026
The plate heat exchanger transfers heat to the domestic hot water. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The hot water takes a long time to come out or it cuts off in the middle of the shower.
Cause: Lime deposits clog the channels of the heat exchanger, causing the water flow to be irregular.
Check if the cut matches the minimum ignition flow rate: if the flow increases and the boiler restarts, it may be another fault, not the heat exchanger.
- 02
The flow of hot water has decreased significantly, even though the taps and shut-off valve are fully open.
Cause: Limescale reduces the internal diameter of the heat exchanger channels, constricting the water flow.
First, check the cold water inlet filter of the boiler, as it often gets clogged and causes the same symptom.
- 03
Water is dripping from underneath the heat exchanger or its connections.
Cause: The PCBs can crack due to thermal fatigue and start leaking water outside the circuit.
Dry the area well, start the boiler, and locate whether the dripping originates from the joints of the connections or from the control board itself.
- 04
It is noticeable that the boiler consumes more gas than usual to provide the same domestic hot water.
Cause: With less useful exchange surface due to the scale, the boiler requires more time and power to reach the same temperature.
Compare the time it takes to heat now versus before, and check if it coincides with a hard water area.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Airsol plate heat exchanger 3003200026
- Catalogue reference
- 3003200026
- Uniclima internal SKU
- IPHLHKB124
- Brand
- Airsol
- Type of part
- Plate heat exchanger
- Units in stock
- 7 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Manufacturer
- Zilmet
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Airsol Capriz 25 Manual (PDF) Document © Airsol, provided as a technical reference.
Frequently asked questions about the heat exchanger 3003200026
Does this Zilmet heat exchanger fit a Heatline Capriz 25?
Is it also compatible with a Heatline Compact C24?
When should the Zilmet heat exchanger of a Heatline Capriz 25 be replaced?
Spare parts related to Airsol Capriz
