Chaffoteaux Alixia 24 FF Pressure Gauge Ref. 60000725

Chaffoteaux boilers compatible with reference 60000725

Pressure gauge with reference 60000725. 35 verified compatibilities: Alixia 24 FF and Alixia 25 CF.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if the ref. 60000725 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 60000725. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms and faults that the pressure gauge 60000725 resolves.

The manometer shows the pressure of the boiler circuit. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The needle of the manometer does not move, regardless of the actual pressure of the system.

  Cause: The internal mechanism has jammed or broken and no longer translates the circuit pressure into needle movement.

  Bleed a radiator or add some water to force a pressure change and check if the needle reacts.

• 02

  The pressure gauge always shows outside the normal range, either very high or very low, and it does not change even if you refill or bleed.

  Cause: The internal mechanism has lost calibration and no longer responds proportionally to the actual pressure.

  If you have another reference point (a portable manometer, for example), compare the reading before declaring the part faulty.

• 03

  There is a water leak right at the fitting where the pressure gauge connects to the boiler.

  Cause: The gasket or the thread of the brass fitting has lost tightness over time.

  Gently tighten the fitting and check again after a few minutes; if it continues to drip exactly there, then it is time to replace the part.

• 04

  It's hard to tell if the circuit is properly filled because you don't trust what the manometer indicates.

  Cause: Without a reliable pressure reading, there is no way to know if the circuit is truly full or if it still lacks water.

  Fill it gradually and compare what the needle indicates with the usual behavior of the boiler (starts, noises) to see if the pressure gauge is misleading.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Chaffoteaux pressure gauge 60000725

Catalogue reference

60000725

Brand

Chaffoteaux

Type of part

Pressure gauges & aquastats

Units in stock

7 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

maximum pressure

3 bar

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Chaffoteaux Niagara C 25 FF Manual (PDF)Document © Chaffoteaux, provided as a technical reference.