Pressure Gauge Junkers Euroline ZW23 1 AE 23 S3705 Ref. 87387036010
RefurbishedJunkersPressure gauges & aquastats

Pressure Gauge Junkers Euroline ZW23 1 AE 23 S3705 Ref. 87387036010

Stock · 1 unit

In the Junkers Euroline boilers, the Junkers Euroline ZW23 1 AE 23 S3705 Pressure Gauge Ref. 87387036010 measures and controls the pressure of the circuit. If it fails, you may notice incorrect readings that cause the boiler to lock out due to a false lack of pressure or poor temperature regulation. This pressure gauge is compatible with models such as ZW23-1 AE, ZW24-1 E LH AE, and ZW24-2 E LH AE, among others. It is recommended to replace it if you observe that the needle is not indicating correctly or if the boiler is experiencing operational issues related to pressure.

VAT included

Compatibility

Junkers boilers compatible with reference 87387036010

Pressure gauge with reference 87387036010. Four confirmed compatibilities: ZW23-1 AE and ZW24-1 E LH AE.

Proven compatibility

Boiler modelFamilyVerification
Junkers ZW23-1 AEEurolineContrasted
Junkers ZW24-1 E LH AEEurolineContrasted
Junkers ZW24-2 E LH AEEurolineContrasted
Junkers ZW24-2 E LH AECeraclassContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if the ref. 87387036010 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 87387036010. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the manometer 87387036010 resolves.

The manometer shows the pressure of the boiler circuit. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The pressure gauge does not reach the green zone and remains in the lower area, even though the boiler has been on for a while.

    Cause: The mechanical indicator does not reflect the actual pressure of the circuit because the spring or the internal bellows have lost travel.

    Bleed the circuit and fill it up to the usual level when cold. Check if the needle responds during the filling process.

  • 02

    The yellow needle is stuck at the same point regardless of what happens with the pressure.

    Cause: The internal mechanism of the indicator is jammed or has residues, which prevents it from moving even when the pressure changes.

    Gently tap the casing and see if the needle moves. If it does not react to bleeding or refilling, the blockage is inside the indicator.

  • 03

    I don't know if I really have pressure because the gauge gives different readings depending on the day.

    Cause: A loose brass fitting or a damaged internal gasket allows air to enter the measuring chamber, affecting the reading.

    Check that the brass fitting is properly tightened to the boiler and that there is no moisture or dripping around before replacing the part.

  • 04

    The boiler warns of low pressure even though the indicator seems to be within the range.

    Cause: The visual reading of the indicator does not match the actual pressure of the circuit, which can lead to incorrect decisions.

    Compare the reading of this indicator with another measurement point in the circuit, if available, before declaring the part defective.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Junkers pressure gauge 87387036010

Catalogue reference
87387036010
Brand
Junkers
Type of part
Pressure gauges & aquastats
Units in stock
1 unit
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Pressure range
0-4 bar
Scale of the secondary indicator
1-2-3, with a green/gray strip for the work area
Needle color
yellow
Body
black plastic head on brass fitting
Frequently Asked Questions

Frequently asked questions about the pressure gauge 87387036010

For which models is the pressure gauge Junkers Euroline ZW23 1 AE 23 S3705 Ref. 87387036010 compatible?
It is compatible with the models from the Euroline range: ZW23-1 AE, ZW24-1 E LH AE, ZW24-2 E LH AE, and with the model from the Ceraclass range: ZW24-2 E LH AE.
What scale and indicator does the head of this part have for the Ceraclass ZW24-2?
The scale is 1-2-3, with a green/gray band indicating the working area and a yellow needle.
Is it the same part for the Euroline ZW23-1 AE and the ZW23-1 KE?
Yes, both variants, AE and KE, are listed as compatible with the reference MPEZW23AE.
How many models are compatible with this reference?
A total of 4 models are compatible with the Junkers Euroline ZW23 1 AE pressure gauge.
What fault codes does this product have?
There are no documented fault codes.

Spare parts related to Junkers Euroline

Entrega calculada por destinoDelivery time shown at checkout
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Pressure Gauge Junkers Euroline ZW23 1 AE 23 S3705 Ref. 87387036010