Baxi Roca Laura 20 Circulating Pump Grundfos UPS15-50 J1 CIAO Ref. 59725003
Refurbished Baxi Roca Pumps Grundfos

Baxi Roca Laura 20 Circulating Pump Grundfos UPS15-50 J1 CIAO Ref. 59725003

Grundfos UPS15-50 J1 circulator pump, ref. 59725003, with the Baxi Roca brand on the label. It moves the heating water between the boiler and the radiators and operates at 230 V with three speeds (45, 70, and 95 W). It is compatible with the Baxi Roca Laura 20/20F boiler. It is sold refurbished, tested, and comes with a 1-year warranty.

Type of part
Pumps
internal SKU
BOM043
Warranty
1 year
VAT included Stock · 1 unit
Compatibility

Compatible Baxi Roca boilers

Circulating pump. A proven compatibility: Laura 20.

Proven compatibility

Boiler modelFamilyVerification
Baxi Roca Laura 20Baxi RocaContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if it is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

  1. Locate the label on the circular cover of your pump motor, with the boiler powered off and cold.
  2. Check that the model is UPS15-50 J1 CIAO and that the P/N is 59725003. Also, look at the code 27.001.01 under the Grundfos logo and the PC 0707R1.
  3. Check the table on the label for the three speeds: 45, 70, and 95 W, with 0.21, 0.32, and 0.42 A. It should also indicate 230 V, 50 Hz, and 2 µF.
  4. Check that the label indicates IP 42, TF 95, class H, and a maximum of 3 bar.
  5. Compare the shape of the body and the connections with the photos in the technical sheet.
  6. Check that your boiler is the Baxi Roca Laura 20/20F, with which this pump is compatible. If your boiler is different, call 911 17 77 77 or send us a photo of the pump label and another of the boiler's PCB from the Contact section.
Diagnosis and fault codes

Symptoms that require diagnosis in the circulation pump

The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    It doesn't start after the summer.

    Cause: Rotor seized due to limescale.

    With the boiler powered off, check if the shaft rotates.

  • 02

    It is leaking water from the pump.

    Cause: Seals of the connections in poor condition, or leak in the body or in the motor.

    Check the seals of the connections. If the leak comes from the body or the motor, the pump needs to be replaced.

  • 03

    The boiler locks out due to overheating.

    Cause: The water is not circulating through the circuit.

    Confirm that the pump is running and that there is no air in the circuit.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Technical sheet: Baxi Roca circulator pump

Uniclima internal SKU
BOM043
Brand
Baxi Roca
Type of part
Pumps
Units in stock
1 unit
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Reference
59725003
Model
Grundfos UPS15-50 J1 CIAO
Brand on the label
Baxi Roca · Grundfos
Speed I
45 W · 0.21 A
Speed II
70 W · 0.32 A
Speed III
95 W · 0.42 A
Power supply
230 V · 50 Hz
Condenser
2 µF
Protection
IP42
Insulation
Class H
Temperature class
TF95
Maximum pressure
3 bar
Marked codes
27.001.01 · PC 0707R1
Connections
Two threaded connections on the pump body
Before purchasing
  • Not valid for Beretta Ciao 24 CSI: it has a different pump, the 20002906 (UPS15-50 A0 B/BC).
  • Do not confuse with 20002906 (UPS15-50 A0 B/BC): Another Grundfos UPS15-50, with a different number and suffix. It is installed in other boilers and not this one.
  • Do not confuse with 27.001.01: Code marked on the bottom of the label, under the Grundfos logo. This is not the reference for ordering: the reference is P/N 59725003.
  • Do not confuse with 0707R1: PCB code printed on the label. It is not the reference for the pump.
  • Contact us before purchasing if your boiler is: Baxi Roca Laura 20/20.
Frequently Asked Questions

Frequently asked questions about the circulation pump

Which boilers is it compatible with?
It is compatible with the Baxi Roca Laura 20/20F. For the Baxi Roca Laura 20/20, please consult us before purchasing. If your boiler is different, call 911 17 77 77 or send us a photo of the pump label and the boiler's PCB from the Contact section, and we will confirm if it is suitable.
Where is the code and what do the numbers on the label indicate?
The label is on the circular cover of the motor. The reference for ordering is P/N 59725003. Below the Grundfos logo is code 27.001.01 and next to the P/N, the code PC 0707R1. To identify the pump, compare the full model and the P/N, not just one of the codes.
Does any UPS15-50 J1 work or only the one that has CIAO?
Don't take it for granted. The full name of this pump is UPS15-50 J1 CIAO and its P/N is 59725003. CIAO is part of the marked model and, by itself, does not identify the boiler. If your pump has a different suffix or number, please consult us before purchasing.
What power and current does it have at each speed?
At 230 V and 50 Hz, with a 2 µF capacitor: speed I, 45 W and 0.21 A; speed II, 70 W and 0.32 A; speed III, 95 W and 0.42 A. It has IP42 protection, class H insulation, and supports a maximum of 3 bar.
Is it sold tested and with a warranty?
Yes. The pump is sold refurbished, tested, and comes with a 1-year warranty.
Can I change it myself?
First, check that the model, speeds, and connections match. It's better to consult a qualified technician.
Entrega calculada por destino Delivery time shown at checkout
1-year warranty reviewed and tested
14-day return uninstalled parts
Technical support we verify your model
Baxi Roca Laura 20 Circulating Pump Grundfos UPS15-50 J1 CIAO Ref. 59725003