Immergas VITRIX Circulating Pump Grundfos UPS15-60 ICHS Ref. 3.020418
Grundfos UPS15-60 circulator pump (Immergas code 3.020418, P/N Grundfos 96972810) that circulates water through the heating circuit. Please confirm your model before purchasing. It is sold refurbished, tested, and comes with a 1-year warranty.
- Type of part
- Pumps
- Status
- Refurbished
- internal SKU
- BOM049
- Warranty
- 1 year
VAT included Stock · 1 unit
How to check if it is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Locate the round label on your pump's motor. It should say Grundfos and the type UPS15-60.
- Check the P/N 96972810 on the label. Also, verify that your pump has the Immergas code 3.020418.
- Compare the electrical data: 230 V, 50 Hz, 2.5 µF, IP42, class H, TF95 and a maximum of 0.3 MPa. The consumption table should show 0.20 A / 45 W, 0.31 A / 70 W, and 0.39 A / 90 W.
- Discard similar codes like 1.047247: they are not 3.020418.
- Confirm the model of your boiler: call 911 17 77 77 or send us a photo of the pump label and the boiler PCB from Contact.
Technical sheet: Immergas circulator pump
- Uniclima internal SKU
- BOM049
- Brand
- Immergas
- Type of part
- Pumps
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Reference
- 3.020418
- P/N Grundfos
- 96972810
- Pump
- Grundfos UPS15-60
- Speeds
- Three: I, II and III
- Consumption speed I
- 45 W · 0.20 A
- Consumption speed II
- 70 W · 0.31 A
- Consumption speed III
- 90 W · 0.39 A
- Power supply
- 230 V · 50 Hz
- Condenser
- 2.5 µF
- Protection
- IP42
- Class
- H
- Thermal class
- TF95
- Maximum pressure
- 0.3 MPa (3 bar)
- Presentation
- Pump mounted on its hydraulic body (see photos)
- Status
- Refurbished and tested. 1-year warranty.
Before purchasing
- Not valid for Immergas Mythos HP: it has a different pump (ref. 1.047247, UPM4S 15-60)
- Do not confuse with 1.047247: Another Grundfos pump, UPM4S 15-60, with a different code. This is not this part.
- Please consult us before purchasing if your boiler is: Immergas Victrix Intra 26 KW.
Frequently asked questions about the circulation pump
Is it suitable for my boiler?
You need to confirm it with your model. Check that the label on your pump says UPS15-60 and P/N 96972810, and that your pump has the code 3.020418. If you have any doubts, call us at 911 17 77 77 or send us a photo of the pump label and the PCB of your boiler from Contact.
Where is the code for my pump?
On the round label of the motor, the type (UPS15-60), the P/N 96972810, and the electrical data are listed. Also, check your pump for the Immergas code 3.020418.
What is the difference from other similar Immergas pumps?
Due to the type and code. This is a Grundfos UPS15-60 three-speed with the code 3.020418. The 1.047247 is a UPM4S 15-60, another model.
Does it have three speeds?
Yes. It has three speeds (I, II, and III) of 45, 70, and 90 W, with 0.20, 0.31, and 0.39 A respectively.
What electrical and pressure data does it have?
230 V · 50 Hz; 2.5 µF capacitor; IP42 protection, class H and thermal class TF95; maximum pressure of 0.3 MPa (3 bar). The consumption is 0.20 A (45 W), 0.31 A (70 W), or 0.39 A (90 W) at each speed.
Is it sold tested and with a warranty?
Yes. It is a refurbished part, tested and with a 1-year warranty. It must be installed by a qualified technician.