CEZA FSECZ355P2 PCB · 14064.1190.1 for Biasi Malia 28E

Application to the exact variant pending confirmation. It is the PCB that regulates the boiler. card, main board, and ignition board of type CEZA ST7 or regulation PCB. It is suspected if the boiler does not start or ignite and the fuse, connections, and sensors are fine.

Type of part: PCBs (control boards)
Status: Refurbished
internal SKU: PLC327
Warranty: 1 year

VAT included Stock · 3 units

Compatibility

Biasi boilers compatible

PCB. 0 verified compatibilities. There are another 11 models that we are still checking.

Models pending verification

These models are associated with this reference, but we have not finished verifying them yet, so we do not consider them compatibleIf your boiler is one of them, send us a photo of the part you are going to replace and we will verify it before you purchase.

Biasi Malia 24E	Biasi	Unconfirmed
Biasi Manaut Contract 3 Stelle M90.24CM/F and M90.28CM/F (since 05/2006)	Biasi	Unconfirmed
Biasi Manaut Nova Parva / Super Parva / Parva Externa M90.24A (since 11/2006)	Biasi	Unconfirmed
Biasi Manaut Minox 3 28E, Minox 3 24E and Minox 24-28 A/E (since 09/2006)	Biasi	Unconfirmed
Biasi Savio Biasi M94.24CM and M94.28CM (after 2006)	Biasi	Unconfirmed
Biasi Malia 28E	Biasi	Unconfirmed
Biasi Manaut Contract M90B.24A (since 11/2006)	Biasi	Unconfirmed
Biasi Manaut Contract M90B.28A (since 11/2006)	Biasi	Unconfirmed
Biasi Riva Compact M90E	Biasi	Unconfirmed
Biasi Riva Plus M90D	Biasi	Unconfirmed
Biasi Garda M90F	Biasi	Unconfirmed

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

Guide

How to check if it is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

Look for the code 14064.1190.1 and the designation FSECZ355P2 on the PCB. The circuit also includes M800109 and ECSWS355V6.
Compare with the references: BI1885101 (Manaut and Biasi) and M800109. Do not confuse it with BI1305101 (Riva Compact M96E) or BI1475114 (PCB "main" of the Garda).
Look at the model on the rating plate of your boiler: the Malia 28E is registered; compare the codes with another model.
if they match, call us at 911 17 77 77 with your boiler model and we will reserve it for you.

Diagnosis and fault codes

Symptoms that require diagnosis on the PCB

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

01
The boiler does not start or ignite.
Cause: Faulty PCB, when the fuse, connections, and sensors are fine.
Check the fuse, the connections, and the sensors. If everything is in order, compare the codes on your PCB with those on this one and consult us.
02
06E, 07E or 08E appears: anomaly in an NTC sensor.
Cause: Heating, domestic or outdoor NTC sensor faulty or with defective wiring.
Have a technician check the sensor and its connection.
03
The boiler does not ignite and locks with fault code E01.
Cause: Flame not detected on startup: gas fault, ignition fault, or electrode fault.
Reset once. If it repeats, have a technician check it.
04
The boiler locks with E11 even when the burner is off.
Cause: Flame sensor: the ionization electrode, its cable, or the plate detect flame.
Have a technician check the electrode, cable, and PCB.
05
The E03 fault code reappears after resetting the boiler.
Cause: Internal fault of the PCB or wiring.
Reset and observe. If it returns, have a technician check it: wiring and then the PCB.
06
The boiler is locking with E06, E07, or E08 and the temperature displayed is not reliable.
Cause: NTC sensor faulty, or with connector or cable in poor condition.
Have a technician check the connector, cable, and sensor.
07
The boiler locks with E22: there is a flame even though the gas valve is closed.
Cause: Call present after closing the gas valve: fault of the PCB or the gas valve.
It is a security alarm: have a technician check it as soon as possible.
08
The boiler does not ignite and the pilot indicates a burner ignition fault.
Cause: Ignition fault: it may be due to lack of gas, insufficient spark, or faulty electrodes.
Check that gas is arriving with pressure, that there is a spark, and that the electrodes are in good condition. If everything is fine, have a technician check it before replacing the PCB.

Fault codes Manaut / Biasi that require diagnosis

Code	Fault	Technical checks
01E	Lockout due to burner ignition fault.	Press the reset button once. If it locks again, have a technician check it: it is usually the ignition or flame detection electrode, and then the gas valve.
06E	NTC sensor anomaly in heating.	Have a technician check the heating sensor and its connection.
07E	Anomaly of the NTC sensor for domestic hot water.	Have a technician check the domestic hot water sensor and its connection.
08E	Anomaly of the external NTC sensor.	Have a technician check the external sensor and its wiring.
E01	Safety lock due to ignition failure: flame not detected at startup.	Reset once. If it repeats, have a technician check: gas, electrode, ignition cable, and PCB.
E02	Lockout due to activation of the safety thermostat, due to overheating.	Check for water circulation and bleed the air. If it repeats, have a technician check it.
E03	Generic lock: internal fault without specific detail.	Reset and observe. If it returns, have a technician check it: it points to the PCB and the wiring.
E06	Fault of the heating NTC sensor (flow).	Have a technician check it: connector, cable, and sensor. Point to the sensor if the cable is fine.
E07	Fault of the NTC sensor for domestic hot water.	Have a technician check it: connector, cable, and domestic hot water sensor. Unstable hot water points to the sensor.
E08	Fault of the external NTC sensor. It only affects if an external sensor is installed.	Have a technician check the cable and external sensor.
E11	Flame detection fault: the boiler detects flame with the burner off.	Have a technician check: ionization electrode, cable, and PCB.
E12	Fault of the return heating NTC sensor.	Have a technician check it: connector, cable, and sensor. The return reading is not reliable.
E19	Anomaly of the domestic hot water inlet sensor.	Have a technician check it: connector and domestic hot water sensor.
E20	Gas valve blockage due to pilot valve control hardware failure.	Reset and check if it returns. If it persists, have a technician check it: it is usually the PCB.
E21	Gas valve blockage due to control relay failure of the valve.	It cannot be fixed in the field: have a technician check it. It points to the PCB.
E22	Presence of flame after closing the gas valve.	It is a security alarm: have a technician check it as soon as possible. It points to the PCB or the gas valve.
Fault code 01	Burner ignition fault.	Check that gas is arriving with pressure, that there is a spark, and that the electrodes are in good condition. An ignition fault is not always the PCB: have it checked by a technician. The manual for the model does not use this number: it indicates the fault with a warning light.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Technical sheet: PCB (control board) Biasi

Uniclima internal SKU: PLC327
Brand: Biasi
Type of part: PCBs (control boards)
Units in stock: 3 units
Status: Refurbished
Warranty: 1 year
Shipping: Delivery time shown at checkout
Return: 14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

type and marked supply: Type BC 230V/50Hz
conformity marking: CE 0051
Inventory — Indicated reference: M800109; 14064.1190.1
Inventory — Type: BC; marked supply: 230 V/50 Hz
Inventory — Application indicated in inventory: MANAUT MALIA 28E
Inventory — Marked code: 14064.1190.1; 42/2013; 044192; 12408005 20/12; ETPCW0002; 1015
Inventory — PCB Marking: M800109; ECSWS355V6
Data of — Type of PCB: CEZA ST7 · main and ignition
Identification — Marked designation: FSECZ355P2
Identification — Marked code: 14064.1190.1
Identification — Marked code: 42/2013
Identification — Marked code: 044192
Identification — Marked code: M800109
Identification — Marked code: ECSWS355V6
Identification — Marked code: 12408005 20/12
Identification — Marked code: ETPCW0002
Identification — Marked code: 1015
Technical sheet: type and marked power supply: Type BC 230V/50Hz
Technical sheet: conformity marking: CE 0051
Inventory data — Indicated reference: M800109; 14064.1190.1
Inventory data — Type: BC; marked supply: 230 V/50 Hz
Inventory data — Application indicated in inventory: MANAUT MALIA 28E
Inventory data — Marked code: 14064.1190.1; 42/2013; 044192; 12408005 20/12; ETPCW0002; 1015
Inventory data — PCB marking: M800109; ECSWS355V6
Pending applications to verify: Existing transcription in "Compatibilities"; it has not been documented in this update and should not be treated as verified compatibility: Biasi MALIA 28E

Before purchasing

Biasi Malia 24E: (Malia 24E with 1 PCB)
To confirm: Biasi Contract 3 Stelle M90.24CM/F and M90.28CM/F (since 05/2006):
To confirm: Biasi Nova Parva / Super Parva / Parva Externa M90.24A (since 11/2006):
To confirm: Biasi M9024S, Manaut Minox 3 28E, Minox 3 24E, and Minox 24-28 A/E (since 09/2006):
To confirm: Savio Biasi M94.24CM and M94.28CM (after 2006):
Not compatible or excluded at source: Biasi Riva Compact M96E (24S, 28S, and 32S) — It uses a different ignition PCB: BI1305101 (Bertelli),
Do not confuse: BI1475114 — PCB "main" of the Biasi Garda M90F — Another code: list it separately from BI1885101. Compare it.
Compare the 14064.1190.1 or the M800109: Not confirmed: the designation FSECZ355P2.
To confirm: 14064.1190.1 and BI1885101: . M800109 and BI1885101: . No official breakdown. The names vary (card, main board and ignition board, regulation PCB). Malia 28E: confirms it.
Pending registered applications to confirm by model, variant, or programming: Manaut Malia 28E; Manaut Contract M90B.24A (since 11/2006); Manaut Contract M90B.28A (since 11/2006); Biasi Riva Compact M90E; Biasi Riva Plus M90D; Biasi Garda M90F.

Frequently Asked Questions

Frequently asked questions about the PCB (control board)

How do I recognize the PCB 14064.1190.1?

Look for the code 14064.1190.1 and the designation FSECZ355P2 on the label; also include M800109, ECSWS355V6, and the marking Type BC 230V/50Hz. Provide "M800109 14064.1190.1" as the model of the CEZA brand card, and title it "CEZA M800109 14064.1190.1 BI1885101".

Is it compatible with my Biasi Malia 28E?

The compatibility of this variant is pending confirmation. To be confirmed: Yes. Registered: for the Malia 28E. It also mentions the Malia 24E. If your boiler is different, send us a photo of the label and the specifications plate from Contact, or call 911 17 77 77.

What is the BI1885101 and how is it related to the 14064.1190.1?

The BI1885101 is the reference that Manaut ("Reference MANAUT: BI1885101") and Biasi give to this CEZA board. They link the 14064.1190.1 to the BI1885101 (to be confirmed); and they associate it with the M800109. It indicates that it replaces the 10045083.

What other boilers are compatible with the BI1885101?

The compatibility of this variant is pending confirmation. To be confirmed: With: Biasi Roca Contract M90B.24A and M90B.28A, Biasi Riva Compact M90E, Riva Plus M90D and Garda M90F. With: Contract 3 Stelle M90.24CM/F and M90.28CM/F, Nova Parva M90.24A and Savio Biasi M94.24CM and M94.28CM.

Is it compatible with the Biasi Riva Compact M96E or with the PCB "main" of the Garda?

The compatibility of this variant is pending confirmation. According to the Riva Compact M96E.24S, 28S, and 32S, it uses a different ignition PCB, the BI1305101 (Bertelli). The same list for the Garda M90F includes a "main" PCB, the BI1475114, in addition to the BI1885101. Compare the code and contact us from Contact.

What does each code marked on the PCB mean?

14064.1190.1 is the CEZA reference of the board; M800109 is on a sticker on the PCB and links it to the BI1885101; FSECZ355P2 is the marked designation; BI1885101 is the reference for Manaut and Biasi; ECSWS355V6 is printed on the circuit.

Is it necessary to program it and who should install it?

Please note that your module BI1885101 is programmed with the instructions for your product: please provide us with the model of your boiler. It must be installed by a qualified technician: it operates at 230 V and controls a gas boiler.

Entrega calculada por destino Delivery time shown at checkout

1-year warranty reviewed and tested

14-day return uninstalled parts

Technical support we verify your model

CEZA FSECZ355P2 PCB · 14064.1190.1 for Biasi Malia 28E