Wiesberg RSSE 24 Pressure Gauge Ref. 2695000227
Pressure gauge with a scale of 0 to 4 bar, compatible with the Wiesberg RSN, RSNE, RSS, RSSE 24 range and with the Unical DUA BTN, CTFS, and CTN 24 boilers indicated in compatibility. It does not have a brand or manufacturer code printed on the part. The replacement requires first confirming the fault of the part through technical diagnosis, even when the needle does not respond or remains fixed outside the range.
- Type of part
- Pressure gauges & aquastats
- Status
- Refurbished
- Catalogue reference
- 2695000227
- Warranty
- 1 year
Wiesberg boilers compatible with reference 2695000227
Pressure gauge with reference 2695000227. A proven compatibility: RSSE 24.
Verified compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Wiesberg RSSE 24 | Wiesberg | Verified |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the ref. 2695000227 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 2695000227. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis on the manometer 2695000227
The manometer shows the pressure of the boiler circuit. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
When refilling the circuit with the filling key, the needle does not move.
Cause: The manometer is not reflecting the actual increase in pressure that you are introducing into the circuit.
Fill until you feel resistance or the usual pressure limit and wait a few seconds; if the needle still does not move, it is not a mechanism delay.
- 02
There is a water leak at the connection of the pressure gauge to the circuit.
Cause: The gasket or the coupling thread has lost its seal, and water is leaking outside instead of staying inside, transmitting pressure.
Dry the area and, without forcing, check if gently tightening the thread stops the dripping; if it reappears in a few minutes, the problem is with the part or its gasket.
- 03
The dial is not clearly visible because the glass is broken or worn out.
Cause: Wear or a blow can leave the glass opaque or cracked, even if the mechanism behind it continues to function.
If the needle still moves while bleeding, you can get an approximate orientation while the spare part arrives, but do not set pressure based on that reading.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Wiesberg pressure gauge data sheet 2695000227
- Catalogue reference
- 2695000227
- Uniclima internal SKU
- MPWRSSE24
- Brand
- Wiesberg
- Type of part
- Pressure gauges & aquastats
- Units in stock
- 7 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Pressure gauge
- 0-4 bar
Frequently asked questions about the pressure gauge 2695000227
Is this pressure gauge Ref. 2695000227 compatible with the Wiesberg RSSE 24 boiler?
How many models are compatible with this manometer?
What pressure range does this manometer indicate?
What is the reference for this manometer?
Are there documented fault codes for this product?
Spare parts related to Wiesberg Wiesberg
