Refurbished Fagor Pumps Grundfos

Fagor FE 24 EMA N Circulating Pump Grundfos UP15-50 A0 /FG Ref. N47G005M0

The N47G005M0 is a Grundfos UP15-50 A0 /FG circulator pump that circulates water through the heating circuit of the boiler. It is confirmed for the Fagor FE 24 EMA N, FE 24 EC-1 N, and FEE 24 MA N boilers, as well as other Fagor FE and FEE models on the compatibility list. It operates at 230 V · 50 Hz and 90 W. It is sold refurbished, tested, and with a 1-year warranty.

Type of part: Pumps
Status: Refurbished
internal SKU: BOM009
Warranty: 1 year

VAT included Stock · 1 unit

Compatibility

Compatible Fagor boilers

Circulating pump. Ten verified compatibilities: FE 24 EMA N and FE 24 EMA-1 N.

Proven compatibility

Boiler model	Family	Verification
Fagor FE 24 EMA N	Fagor	Contrasted
Fagor FE 24 EMA-1 N	Fagor	Contrasted
Fagor FE 24 EMA-1 B	Fagor	Contrasted
Fagor FE 24 EC-1 N	Fagor	Contrasted
Fagor FE 24 EC-1 B	Fagor	Contrasted
Fagor FEE 24 MA N	Fagor	Contrasted
Fagor FEE 24 MA-1 N	Fagor	Contrasted
Fagor FEE 24 MA-1 B	Fagor	Contrasted
Fagor FEE 26 MA-1 N	Fagor	Contrasted
Fagor FEE 26 MA-1 B	Fagor	Contrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

Guide

How to check if it is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

With the boiler disconnected from the power supply, locate the circular label on your current pump motor, which has a plug in the center.
Read the complete marking and compare it with that of this unit: Type UP15-50 A0 /FG, P/N 59505451, PC 0509FG and, under the Fagor logo, N47G005M0. The entire designation must match.
Check the electrical data on the label: 230 V ~ 50 Hz, 2 µF, 0.39 A, 90 W, IP 42, class H, and max. 3 bar.
Compare the hydraulic body, cable, and electrical connector of your pump with the photos. If they are different, please consult us before ordering it.
Check that your boiler model is on the list of compatible ones. If it is not listed or the designation does not match exactly, call us at 911 17 77 77 with your boiler model and a photo of the label.

Diagnosis and fault codes

Symptoms that require diagnosis in the circulation pump

The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:

Common symptoms and faults

01
The pump does not start.
Cause: Possible shaft blockage, which can be checked by turning it by hand.
A technician can check if the shaft turns manually: with the power off and the circuit isolated on both sides of the pump, remove the indicator plug from the center of the label. In the FEE 24 MA, also check that the boiler is not disconnected from the power supply: the anti-seizing safety of the pump only operates with the boiler connected.
02
Damaged motor or pump after running without water
Cause: Prolonged operation without water circulation or without the minimum inlet pressure.
Before starting the pump, check that the circuit is full, bled of air, and under pressure.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Technical sheet: Fagor circulator pump

Uniclima internal SKU: BOM009
Brand: Fagor
Type of part: Pumps
Units in stock: 1 unit
Status: Refurbished
Warranty: 1 year
Shipping: Delivery time shown at checkout
Return: 14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Reference: N47G005M0
Grundfos designation: UP15-50 A0 /FG
Marked P/N: 59505451
Marked PCB: 0509FG
Manufacturer of the pump: Grundfos, labeled with the reference Fagor
Voltage and frequency: 230 V ~ · 50 Hz
Power (P1): 90 W
Maximum current (Imax): 0.39 A
Condenser: 2 µF
Protection: IP 42
Class (label): H
TF (label): 95
Maximum pressure: 3 bar
Presentation: Hydraulic body and motor, with cable and electrical connector
Status: Refurbished and tested, with a 1-year warranty.

Before purchasing

Do not confuse with UP 15-50 AO F6: Different Grundfos designation (AO F6, not A0 /FG). Do not consider it equivalent: always compare the full marking on the label.
Do not confuse with UPS 15-50: Grundfos series with another designation (UPS instead of UP). Compare the full designation.
Do not confuse with 59505451 and 0509FG: P/N and PC marked on the Grundfos label of the pump. The Fagor reference is N47G005M0.
Do not confuse with 912011218 and similar codes: Nine-digit codes of the Fagor boiler models from the compatibility list. They are not pump codes.
Please consult us before purchasing if your boiler is: A. O. Smith JLG24-EB (912470034)

Frequently Asked Questions

Frequently asked questions about the circulation pump

Where is the code for this pump and what should I compare?

On the circular label of the motor. This unit is marked Type UP15-50 A0 /FG, P/N 59505451 and PC 0509FG, and under the Fagor logo, the reference N47G005M0, which identifies the pump for Fagor boilers. The electrical data are 230 V ~ 50 Hz, 2 µF, 0.39 A, and 90 W, with IP 42, class H, and max. 3 bar. Compare the entire designation, not just a number.

Is it compatible with my Fagor FE 24 EMA N?

Yes. This pump is confirmed for the Fagor FE 24 EMA N and also for the FE 24 EMA-1 N (912011218). Additionally, compare the marking of your pump with that of this unit.

Is it compatible with other Fagor boilers?

It is confirmed for the Fagor FE 24 EMA-1 B, FE 24 EC-1 N and B, FEE 24 MA N, FEE 24 MA-1 N and B, and FEE 26 MA-1 N and B. If your model is not on the list, call us at 911 17 77 77 with your boiler model and a photo of your pump label.

Is it the same as the UP 15-50 AO F6 or the UPS 15-50?

Do not consider them as equivalents. They are different designations for the UP15-50 A0 /FG and the reference N47G005M0. Always compare the complete marking on the label.

Who should install it and what should be taken into account?

A qualified technician: works with the hydraulic circuit and with 230 V electrical connections. The pump is mounted with the motor shaft in a horizontal position, never vertically, and the circuit must be bled of air. It should not operate without water circulation or without the minimum inlet pressure, as this can damage the motor and the pump. During the first start-up, the shaft may rotate slowly until the water reaches the bearings.

My pump won't start, is this the part I need?

Before replacing it, have a technician check if the shaft turns by hand (with the power off and the circuit isolated, remove the plug from the center of the label) and that the circuit has water and pressure. During the annual maintenance of the Super Compact FE-24EMA, the operation of the pump is checked.

Is it sold tested and with a warranty?

Yes. It is a refurbished circulation pump, tested and with a 1-year warranty.

Entrega calculada por destino Delivery time shown at checkout

1-year warranty reviewed and tested

14-day return uninstalled parts

Technical support we verify your model

Fagor FE 24 EMA N Circulating Pump Grundfos UP15-50 A0 /FG Ref. N47G005M0