Fagor Grundfos UPS15-50 S0 circulation pump CESA02 Ref. N47G008M4
Grundfos UPS15-50 S0 CESA02 circulator pump, reference 59755506, with application code Fagor N47G008M4. It circulates hot water from the boiler through the heating circuit. It operates at 230 V and 50 Hz, with three speeds of 40, 60, and 85 W. It is sold refurbished, tested, and with a 1-year warranty; to check if it is suitable for your boiler, compare its label with that of this pump or consult us.
- Type of part
- Pumps
- Status
- Refurbished
- internal SKU
- BOM013
- Warranty
- 1 year
VAT included Stock · 1 unit
How to check if it is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Locate the label on the round face of your pump motor and look for the designation UPS15-50 S0 CESA02. It can also be read as SO, with the letter O.
- Check the code 59755506 (P/N) and, under the Fagor logo, the code N47G008M4. Also note the PC 0704FG.
- Check the marked values: 230 V, 50 Hz, 2 µF, 0.18 / 0.28 / 0.38 A and 40 / 60 / 85 W. Additionally, IP44, TF 95, class H and 3 bar as maximum pressure.
- Discard the other pumps with similar codes: 59525600, 97549426, and 59725008 are not this pump. The UPSO15-60 CESA02 is from the 15-60 series.
- Compare the appearance with the photos: black plastic hydraulic body, motor with metal casing, and cable with connector.
- If any information does not match or you have doubts, send us a photo of the label or call 911 17 77 77 before ordering.
Technical sheet: Fagor circulator pump
- Uniclima internal SKU
- BOM013
- Brand
- Fagor
- Type of part
- Pumps
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Reference
- 59755506
- Brand of the pump
- Grundfos
- Marked designation
- UPS15-50 S0 CESA02
- Fagor application code
- N47G008M4
- Denomination associated with the Fagor code
- Grundfos UPS 15-50 EMA Fagor
- Marked PCB code
- 0704FG
- Voltage and frequency
- 230 V ~ 50 Hz
- Condenser
- 2 µF
- Speeds
- 3
- Power P1 by speed
- 40 W / 60 W / 85 W
- Current by speed
- 0.18 A / 0.28 A / 0.38 A
- Protection
- IP44
- TF marking
- TF 95
- Class
- H
- Maximum pressure
- 3 bar
- Presentation
- Set with black plastic hydraulic body and cable with connector
- Status
- Refurbished, tested, 1-year warranty
Before purchasing
- Not compatible with Fagor FE25NOX-1N: it uses a different pump variant (UPS15-50 V4 CIAO, code 59725008).
- Do not confuse with 59525600: Grundfos UPS 15-50 130. It is another Grundfos code: it is not 59755506.
- Do not confuse with 97549426: Grundfos UPS 15-50 N 130. UPS N series, with stainless steel pump body, recommended for domestic hot water recirculation and underfloor heating. Another code; this pump does not have N.
- Do not confuse with 59725008: Grundfos UPS15-50 V4 CIAO. Another variant with a different code: it is not 59755506.
- Do not confuse with UPSO15-60 CESA02: Designation of another pump from the 15-60 series. It shares the letters CESA02, but it is not the 15-50.
- Please consult us before purchasing if your boiler is: Fagor Ecomini FA-23E.
Frequently asked questions about the circulation pump
Where is the code for this pump and what should I compare?
On the label of the round face of the motor, the designation UPS15-50 S0 CESA02, the code 59755506 (P/N), the PC 0704FG, and under the Fagor logo, the code N47G008M4 are listed. First, compare the designation and 59755506. Then, compare N47G008M4.
Is it suitable for my boiler?
Compare the designation and codes of your old pump with those of this one. If you are unsure, consult us: send us a photo of the pump label and the boiler control board, or call 911 17 77 77.
What does N47G008M4 mean?
It is the application code Fagor marked on the label, under the Fagor logo. It corresponds to the Grundfos UPS 15-50 EMA Fagor pump. It is the code you need to compare with your old pump.
What do 0704FG and CESA02 mean?
0704FG appears on the label as PC. CESA02 is part of the designation UPS15-50 S0 CESA02. We do not assign a specific meaning to them: use them to compare with your pump. A marked code alone is not sufficient to validate another variant.
What is the difference from other UPS 15-50?
They have different codes. The UPS 15-50 130 is 59525600. The UPS 15-50 N 130 is 97549426: series N, with a stainless steel body. The UPS15-50 V4 CIAO is 59725008. This pump is 59755506, UPS15-50 S0 CESA02.
What electrical data is marked on it?
230 V at 50 Hz, 2 µF capacitor, power P1 of 40, 60, and 85 W at its three speeds, and current of 0.18, 0.28, and 0.38 A. It is also marked IP44, TF 95, class H, and maximum pressure of 3 bar.
Is it sold tested and with a warranty? Who should install it?
It is sold refurbished, tested, and comes with a 1-year warranty. It must be installed by a qualified technician: it operates at 230 V and is connected to the hydraulic circuit of the boiler.