Grundfos UP 15-50 A0/BC Circulating Pump for Beretta Kompakt 24 CSI - Ref. R10024975
Grundfos UP 15-50 A0/BC circulator pump (P/N 59945504) for Beretta Kompakt 24 CSI boiler. It circulates water for the heating circuit and domestic hot water. Manufacturer and code identified from the part label. Plate data: 230V~ 50Hz, 0.39A, 90W, capacitor 2µF, IP44, insulation class H, maximum pressure 3 bar, production code PC:0102BC.
VAT included
Consult via WhatsAppBeretta boilers compatible with reference R10024975
Circulating pump with reference R10024975. A proven compatibility: Kompakt 24 CSI Grundfos UP 15-50 AO/BC.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Beretta Kompakt 24 CSI Grundfos UP 15-50 AO/BC | Beretta | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. R10024975 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference R10024975. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the circulator pump R10024975 resolves.
The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The radiators do not heat up even though the boiler is on.
Cause: If the pump is not working, the hot water does not circulate through the system.
Check if the pump vibrates or makes noise when calling for heat; if it doesn't move, check the power supply to the connector.
- 02
The pump makes noises or feels vibrations when touched.
Cause: This could be due to air in the rotor or wear of the bearing after prolonged use.
Bleed the heating circuit first: often, the noise decreases when the air is removed.
- 03
There is water accumulated at the base of the pump, near the shaft.
Cause: The seal that seals the shaft deteriorates over time and can allow water to pass through.
Dry the area, turn on the heating, and observe if the humidity reappears on the shaft after a while of operation.
- 04
The pump does not start after stopping the boiler in summer.
Cause: The rotor can get stuck if it hasn't been used for a long time, especially if the water is hard.
Before replacing it, try to manually unlock the shaft with a flat screwdriver on the front screw, as indicated by the manufacturer.
Fault codes for Beretta that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| 71 | PRIMARY SENSOR (T) | If the circulating pump is blocked or faulty, there is no flow in the primary; the flow temperature rises quickly, and the boiler detects an overtemperature at the flow sensor (71). Check the power supply to the pump, the start/rotation of the rotor, and ensure there is actual circulation (valves open, no air). |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Beretta R10024975 circulation pump.
- Catalogue reference
- R10024975
- Brand
- Beretta
- Type of part
- Pumps
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Manufacturer
- Grundfos
- Component code
- UP 15-50 A0/BC (P/N 59945504)
- Voltage
- 230V~
- Frequency
- 50Hz
- Condenser
- 2 µF
- Degree of protection
- IP 44
- Insulation class
- Class H
- Maximum pressure
- 3 bar
- Nominal current
- 0.39 A
- Power
- 90 W
- Production code
- PC:0102BC
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Beretta Kompakt 24 CSI Manual Grundfos UP 15-50 AO/BC (PDF)Document © Beretta, provided as a technical reference.
Frequently asked questions about the circulator pump R10024975
Is Grundfos the original manufacturer of the pump for the Beretta Kompakt 24 CSI?
What is the maximum pressure supported by the Grundfos UP 15-50 A0/BC pump of the Kompakt 24 CSI?
What is the Grundfos product code for the pump of the Beretta Kompakt 24 CSI?
What is the power consumption of the Beretta Kompakt 24 CSI pump?
What capacitor does the Grundfos UP 15-50 A0/BC pump use?
Spare parts related to Beretta Beretta
