Fagor Safety Valve FE 24 NOx Ref. AS0012923
Refurbished Fagor Safety valves

Fagor Safety Valve FE 24 NOx Ref. AS0012923

The Fagor FE 24 NOX Safety Valve Ref. AS0012923 is a component that is responsible for releasing water when the circuit pressure exceeds 3 bar. If the valve fails, you may notice that it drips continuously or does not discharge properly when the pressure is excessive. This model is compatible with several boilers, including the FE-24NOX, FE-24NOX/1B, FE-24TC/1B ranges, among others. A technician must confirm through diagnosis whether it needs to be replaced when there are leaks or it is not functioning correctly, as this may compromise the safety of the system.

Type of part
Safety valves
internal SKU
VSMFFE24N
Warranty
1 year
VAT included Stock · 3 units
Compatibility

Compatible Fagor boilers

Safety valve. Nine confirmed compatibilities: FE-24NOX and FE-24NOX/1B.

Verified compatibility

Boiler modelFamilyVerification
Fagor FE-24NOXFE-24NOXVerified
Fagor FE-24NOX/1BFE-24NOX/1BVerified
Fagor FE-24NOX/1NFE-24NOX/1NVerified
Fagor FE-24TC/1BFE-24TC/1BVerified
Fagor FE-24TC/1NFE-24TC/1NVerified
Fagor FE-26TC/1BFE-26TC/1BVerified
Fagor FE-26TC/1NFE-26TC/1NVerified
Fagor FEE-24NOX/1BFEE-24NOX/1BVerified
Fagor FEE-24NOX/1NFEE-24NOX/1NVerified

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if it is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference —. If it is not visible, do not identify the part by its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms that require diagnosis in the safety valve

The safety valve releases pressure when the circuit exceeds its setting. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    Water is continuously leaking from the discharge pipe, whether the boiler is cold or hot.

    Cause: The seat does not close properly, usually due to dirt or limescale in the internal passage.

    Bleed a couple of times with the lever before ruling out that it is just dirt stuck.

  • 02

    The valve is bleeding or releasing water with the boiler at normal pressure, without reaching the 3 bar indicated.

    Cause: The internal spring has lost its calibration or the seat is damaged and opens prematurely.

    Check the pressure gauge right when it trips: if it clearly shows less than 3 bar, confirm that the opening is premature before replacing it.

  • 03

    The heating circuit needs to be filled frequently because it loses pressure.

    Cause: A slow leak from the valve gradually empties the circuit without any obvious dripping.

    Check if the discharge pipe is damp or has limescale marks, indicating that it has been leaking even if it is not currently visible.

  • 04

    When reaching high temperature, a small whistle or puffing sound can be heard from the gas valve.

    Cause: It is the warning that the circuit is approaching the set point and the valve begins to relieve pressure.

    Check the hot pressure with the manometer: if it is around 3 bar, the problem may be with the expansion vessel, not with the valve.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Fagor safety valve

Uniclima internal SKU
VSMFFE24N
Brand
Fagor
Type of part
Safety valves
Units in stock
3 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Setpoint
3 bar
Frequently asked questions

Frequently asked questions about the safety valve

Does this 3 bar valve fit the Fagor FE-24TC/1N boiler?
Yes, the FE-24TC/1N is among the indicated compatible models, along with the FE-24NOX and FE-26TC series.
At what pressure does the safety valve of the FEE-24NOX/1B activate?
A 3 bar, printed on the part itself.
Does this valve work for both the FE-24NOX/1N and the FE-24NOX/1B?
Yes, both variants are on the list of compatible models.
When should this gas valve be replaced in a FE-26TC/1N?
The technical diagnosis must confirm that it is necessary to replace it, even when it is leaking continuously or when it trips at normal installation pressures.

Spare parts related to Fagor FE-24NOX

Delivery calculated by destination Delivery time shown at checkout
1-year warranty inspected and tested
14-day return uninstalled parts
Technical support we verify your model
Fagor Safety Valve FE 24 NOx Ref. AS0012923