Extractor Fan Biasi Myto Condens 24 Ref. BI1503109
RefurbishedBiasiExtractors

Extractor Fan Biasi Myto Condens 24 Ref. BI1503109

70 €VAT includedIn stock · 3 units

Extractor: refurbished spare part that evacuates combustion gases with forced draft. Useful if it doesn't start due to draft failure, makes noise, or doesn't spin. Compatible with Myto Condens Plus 24, Myto (Inox) Condens 24 (ref. BI1503109). Includes a one-year warranty and delivery within 2–4 working days in the EU.

1
Consult via WhatsApp
Delivery in 2–4 working days
1-year warranty
14-day return
Technical support

Key Data

Reference
BI1503109
Brand
Biasi
Type of part
Extractors
Available units
3 units in stock
Status
Refurbished
Warranty
1 year
Shipping
2–4 working days (EU)
Return
14 days

The same part (ref. BI1503109) equips these models. Verified compatibility; check the reference before purchasing.

Myto Condens

  • Myto Condens Plus 24
  • Myto (Inox) Condens 24

Fault codes related to this part (not the entire boiler). They usually have more possible causes: first rule out electrodes, wiring/connections, and gas supply. Verified with ≥3 sources.

CodeWhat does it mean?Cause and diagnosis (this part)
Er 05Fan control anomaly.The extractor does not start or does not deliver the tachometer signal to the PCB, which does not detect speed and locks with Er 05. Check in chimney sweep mode: verify 230 V at the fan connector and that speed appears in INFO (d9); if there is no rotation/signal, the fan BI1503109 is defective.
05EFan control anomaly (code on remote control).Same fault as Er 05 but displayed by the remote: the fan does not rotate or does not return an rpm signal to the PCB. Check power supply to the fan and the tachometer signal (pins OUT/5V/GND) or rpm reading in INFO; if it fails, replace the fan BI1503109.
How do I know if this extractor/fan is the one for my boiler?
Verify the reference BI1503109 printed and ensure your model is on the list of compatible ones; also compare the connections with the original part. It is an NRG part.
What is it used for?
The extractor/fan evacuates the combustion gases (forced draught).
Does it not start due to a draught fault, make noise, or not spin?
Seized, noisy, or unpowered fan.
Which models is it suitable for?
Part shared by various models (see Compatibility). If your model does not appear, send us a photo of the marking and we will confirm it.
Installation and recommendations
Check the connector, the 230 V power supply, and free rotation.
What does refurbished mean and what coverage does it have?
Part removed from a boiler out of service, inspected and tested. Includes 1-year warranty and 14-day return policy. Delivery within 2–4 working days in the EU.
Scroll to the top