PCB Baxi Roca Laura 30/30 - Ref. 122420630

Baxi Roca boilers compatible with reference 122420630

PCB with reference 122420630. 16 verified compatibilities: LAURA 30 A G.N. and LAURA 30 A G.P..

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. 122420630 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 122420630. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis on the PCB 122420630

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The boiler shows no signs of life, neither indicators nor display.

  Cause: The power supply stage of the PCB or its internal fuse has failed and the electronics are left without voltage.

  Before changing the PCB, check with a multimeter that there is mains voltage at its input terminals.

• 02

  Lockouts or fault codes appear that are not related to any specific component of the boiler.

  Cause: The PCB mismanages the readings from the sensors and locks the boiler due to a misinterpretation, not because of an actual fault in them.

  Note the exact code and the moment it appears, and discard NTC, pressure switch, and flame detection electrode.

• 03

  The pump or the gas valve does not activate even though the PCB appears to be on.

  Cause: An internal relay on the PCB that does not close the contact prevents current from reaching those components even though the rest of the electronics are functioning.

  With the boiler calling for heat, listen for the click of the relay activating before assuming the pump or the gas valve is faulty.

• 04

  The boiler turns on but goes through short cycles, stopping and starting again repeatedly.

  Cause: The PCB intermittently loses the signal from a safety sensor and cuts off the gas supply as a precaution.

  Check if the cuts coincide with vibrations or with the heating of the boiler, and verify that the connectors on the PCB are properly fitted.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Baxi Roca PCB 122420630

Catalogue reference

122420630

Uniclima internal SKU

PERL2712

Brand

Baxi Roca

Type of part

PCBs (control boards)

Units in stock

1 unit

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Manufacturing batch

10X74AL LF

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Baxi Roca LAURA 30 A G.P. manual (PDF) Document © Baxi Roca, provided as a technical reference.