Main PCB Ariston Next EVO SFT 11 NG EU Ref. 65152684
RefurbishedAristonPCBs (control boards)

Main PCB Ariston Next EVO SFT 11 NG EU Ref. 65152684

80 €VAT includedIn stock · 1 unit

PCB (control board): refurbished spare part that controls the ignition, modulation, and safety features of the boiler. Useful if the boiler does not ignite, locks up, or the display does not respond. Compatible with Next Evo SFT 11 NG, Next Evo SFT 11 GPL, Next Evo SFT 14 NG (ref. 65152684). Includes a one-year warranty and delivery within 2–4 working days in the EU.

1
Consult via WhatsApp
Delivery in 2–4 working days
1-year warranty
14-day return
Technical support

Key Data

Reference
65152684
Brand
Ariston
Type of part
PCBs (control boards)
Available units
1 unit in stock
Status
Refurbished
Warranty
1 year
Shipping
2–4 working days (EU)
Return
14 days

The same part (ref. 65152684) equips these models. Verified compatibility; check the reference before purchasing.

Ariston/Chaffoteaux Next Evo SFT (gas water heater)

  • Next Evo SFT 11 NG
  • Next Evo SFT 11 LPG
  • Next Evo SFT 14 NG
  • Next Evo SFT 14 LPG
  • Next Evo SFT 16 NG
  • Next Evo SFT 16 LPG

Ariston/Chaffoteaux Next Evo OFT (gas water heater)

  • Next Evo OFT 11 NG
  • Next Evo OFT 11 LPG
  • Next Evo OFT 14 NG

Ariston/Chaffoteaux Avenir Plus SFT (gas water heater)

  • Avenir Plus SFT 11 NG
  • Avenir Plus SFT 11 LPG
  • Avenir Plus SFT 14 NG

Ariston/Chaffoteaux Avenir Plus OFT (gas water heater)

  • Avenir Plus OFT 11 NG
  • Avenir Plus OFT 11 LPG
  • Avenir Plus OFT 14 LPG

Fault codes related to this part (not the entire boiler). They usually have more possible causes: first rule out electrodes, wiring/connections, and gas supply. Verified with ≥3 sources.

CodeWhat does it mean?Cause and diagnosis (this part)
E 7Fan fault.The control/reading circuit of the fan on the PCB (control output and rpm feedback) can fail, causing the fault even if the fan is correct; check the power supply to the fan, control signal, and rpm feedback on the board before discarding the PCB.
E 6Flame detected with gas valve closed.Feedback/ionisation circuit fault in the PCB (damaged electronic input or ground reference) can simulate flame with the valve closed; check ionisation signal at the board input and continuity of electrode/cable, if correct, the PCB is defective.
70Parameter configuration error.PCB parameterization misconfigured or memory damaged (very common after replacing the board); reprogram technical parameters (L/q/F, etc.). If it doesn't save or reappears, replace the board.
How do I know if this PCB is for my boiler?
Verify the reference 65152684 printed and ensure your model is on the list of compatible ones; also compare the connections with the original part.
What is it used for?
The PCB controls the ignition, modulation, sensor readings, and safety features of the boiler.
Is the boiler not igniting, locking out, or is the control board unresponsive?
After ruling out mains voltage, fuse, and connectors, a damaged PCB causes lockouts, blackouts, or erratic display. Repair the external cause before installing the new one.
Which models is it suitable for?
Part shared by various models (see Compatibility). If your model does not appear, send us a photo of the marking and we will confirm it.
Installation and recommendations
After installation, a technician must adjust the service parameters (type of gas, power settings) and check combustion and safety features.
What does refurbished mean and what coverage does it have?
Part removed from a boiler out of service, inspected and tested. Includes 1-year warranty and 14-day return policy. Delivery within 2–4 working days in the EU.
Scroll to the top