Grundfos Circulating Pump UP 15-60 A0 For Saunier Duval Themafast C 24 E - Ref. S9996114
Grundfos circulating pump, type UP 15-60 A0, installed in Saunier Duval boilers such as the Themafast C 24 E and other models from the Combitek, Themaclassic, Renova Star, and Thematek ranges. It circulates the water in the heating circuit. It is replaced when the motor does not start, makes noise, does not provide pressure, or leaks water from the shaft. The factory code for the pump is S9996114.
VAT included
Consult via WhatsAppSaunier Duval boilers compatible with reference S1005200
Circulating pump with reference S1005200. Five confirmed compatibilities: C 24 E and C AS 24 E.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Saunier Duval C 24 E | ThemaClassic | Contrasted |
| Saunier Duval C AS 24 E | ThemaClassic | Contrasted |
| Saunier Duval F 24 E | ThemaClassic | Contrasted |
| Saunier Duval F 25 E | ThemaClassic | Contrasted |
| Saunier Duval C 24 E | Themafast | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. S1005200 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference S1005200. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the circulator pump S1005200 resolves.
The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The pump does not start, nor does it seem to be turning.
Cause: The rotor is locked and the motor cannot turn because there is internal resistance.
Try to free the shaft with the front screw before considering the pump as faulty.
- 02
A vibration or metallic noise is heard in the pump body.
Cause: The internal bearings are worn out or there is air in the circuit.
Bleed the air from the high points of the installation and check if the noise disappears before replacing the pump.
- 03
The boiler turns on but the radiators don't heat up.
Cause: The water does not circulate with sufficient flow because the pump does not provide the necessary pressure.
Check the pressure of the circuit on the boiler's pressure gauge; if it's low, refill it before ruling out the pump.
- 04
Water is accumulating under the pump or at the base of the boiler.
Cause: The shaft has lost tightness due to wear and allows water to leak out.
Dry the area and monitor if it becomes damp again after a few hours of operation.
Fault codes from Saunier Duval that this spare part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| F5 | Overheating of the primary circuit. | If the S1005200 circulating pump is blocked or not rotating, there is no flow in the primary circuit and the temperature rises very quickly, triggering the safety limiter/thermostat. Check by measuring 230 V at the pump terminals during demand, checking consumption/rotation and bleeding to rule out air or obstructions. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Saunier Duval S1005200 circulation pump.
- Catalogue reference
- S1005200
- Brand
- Saunier Duval
- Type of part
- Pumps
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- manufacturer
- Grundfos
- type
- UP 15-60 A0
- Manufacturer code (P/N)
- S9996114
- Production code (PC)
- 0317HH0
- voltage
- 230V ~ 50Hz
- capacitor
- 2.5µF
- Nominal current
- 0.45 A
- Absorbed power
- 105 W
- Protection rating
- IP 44
- Insulation class
- Class F / TF 95
- Maximum pressure
- Max. 3 bar
- Internal reference grundfos
- IWC 4000120855
Frequently asked questions about the S1005200 circulation pump.
Is this Grundfos UP 15-60 A0 circulator pump original from Saunier Duval?
What fault indicates that the pump of the Themafast C 24 E needs to be replaced?
Is this pump compatible with any model of the Themafast C 24 E range?
What voltage and capacitor does the pump of the Themafast C 24 E boiler have?
What fault code is related to this pump?
What is the reference for this circulator pump?
Spare parts related to Saunier Duval ThemaClassic
