Saunier Duval Themafast C 28 E Heating Circulating Pump Ref. S1005500
Refurbished Saunier Duval Pumps

Saunier Duval Themafast C 28 E Heating Circulating Pump Ref. S1005500

When the heating starts, the Saunier Duval Themafast C 28 E Heating Circulation Pump is responsible for moving water through the heating circuit. If this pump fails, you will notice cold radiators, strange noises, overheating, or blockages due to lack of circulation. It is compatible with models from the ThemaClassic range, such as the ThemaClassic F AS 30 A, among others. A technician must confirm through diagnosis whether it needs to be replaced when these symptoms are present or in the case of faults such as F.23, F.24, or F.75.

Type of part
Pumps
Catalogue reference
S1005500
Warranty
1 year
VAT included Stock · 7 units
Compatibility

Saunier Duval boilers compatible with reference S1005500

Circulating pump with reference S1005500. A proven compatibility: ThemaClassic F AS 30 A.

Verified compatibility

Boiler modelFamilyVerification
Saunier Duval ThemaClassic F AS 30 AThemaClassicVerified

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if the part S1005500 is the one for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference S1005500. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms that require diagnosis in the circulator pump S1005500

The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The pump does not spin or start.

    Cause: The rotor is stuck, something common after months of inactivity.

    Try to free the shaft with a screwdriver through the rear slot before purchasing a new one.

  • 02

    Noise or vibration when turning on the heating

    Cause: The rotor rubs while turning or there is trapped air in the pump.

    Bleed the air through the front bleed screw of the pump.

  • 03

    The heating takes a long time to warm up or does not heat.

    Cause: Without sufficient circulation, the heat remains close to the boiler and does not reach the radiators.

    Measure the pressure of the circuit on the manometer: low pressure also hinders circulation.

  • 04

    Water leak from the pump body

    Cause: The mechanical seal of the shaft wears out over time and allows water to pass through.

    Check if the humidity is coming directly from the shaft or from a nearby joint before replacing the pump.

Fault codes Saunier Duval that require diagnosis

CodeFaultTechnical checks
F.23Safety shutdown: excessive temperature variation.The circulator pump (S1005500) blocked or with reduced power does not move flow and the ΔT supply/return spikes; check by forcing the pump to run, confirming vibration/consumption, and that the ΔT decreases after bleeding.
F.24Safety shutdown: temperature increase too rapid.If the pump is seized or not delivering flow, the primary heats up very quickly; check by forcing the pump to start, measuring ΔT, and confirming power supply and pump rotation.
F.75Pump error, lack of water.Upon startup, the electronics await a pressure pulse generated by the pump; if the pump (S1005500) does not start or is faulty, this increase is not detected and F.75 is triggered. Check the supply voltage and ensure that the pressure momentarily rises at the beginning.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Saunier Duval S1005500 circulation pump.

Catalogue reference
S1005500
Uniclima internal SKU
BCCTC28E
Brand
Saunier Duval
Type of part
Pumps
Units in stock
7 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days
Documentation

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

Frequently asked questions

Frequently asked questions about the S1005500 circulation pump.

Does this pump work for both the Themaclassic C28E and the Themaclassic C30E-A?
Yes, it is compatible with both, as well as with Themaclassic F30E, Themafast C28E, and Themafast F30E.
When does the pump of the Themafast F30E fail and need to be replaced?
The technical diagnosis must confirm that it is necessary to replace it, even when the heating water stops circulating, makes noise, or leaks.

Spare parts related to Saunier Duval ThemaClassic

Delivery calculated by destination Delivery time shown at checkout
1-year warranty inspected and tested
14-day return uninstalled parts
Technical support we verify your model
Saunier Duval Themafast C 28 E Heating Circulating Pump Ref. S1005500