Junkers Bosch Flow Sensor Turbine Ref. 87167724000
RefurbishedJunkersFlow DetectorsSaginomiya

Junkers Bosch Flow Sensor Turbine Ref. 87167724000

30 €VAT includedIn stock · 5 units

Turbine-type flow sensor manufactured by Saginomiya (code ELK-0602), used in Junkers/Bosch boilers from the Ceraclass, Ceranorm, Cerapur, ZWB, ZWC, and ZWN series, with equivalents in Elm Leblanc and Saunier Duval Suprapur. The Bosch/OEM number printed on the label is 8 717 002 132, equivalent to reference 87167724000 in the catalog, according to reference arbitration.

Compatibility

Junkers boilers compatible with reference 87167724000

Flow meter with reference 87167724000. Six confirmed compatibilities with two independent sources: ZWC 24-1MF/1MFA and ZWC 24/28-1MF. Verify the printed reference on your part before purchasing.

Compatibility confirmed

Boiler modelFamilyVerification
Junkers ZWC 24-1MF/1MFAEuromaxxConfirmed · 2 sources
Junkers ZWC 24/28-1MFEuromaxxConfirmed · 2 sources
Junkers ZWC 28-1MF/1MF2EuromaxxConfirmed · 2 sources
Junkers ZWC 28/32-1MFAEuromaxxConfirmed · 2 sources
Junkers ZWC 28-3MFKCeraclass ExcellenceConfirmed · 2 sources
Junkers ZWC 24/28-3MFACeraclass ExcellenceConfirmed · 2 sources

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 87167724000 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Locate the reference printed on the body of the flow meter you have installed: it should indicate 87167724000.
  2. Check your boiler model on the nameplate and look for it in the list of compatible models on this page.
  3. Compare the connections and the body with the original part before installing.
  4. If you have any doubts, send us a photo of the screen printing via WhatsApp and we'll confirm it for you before you purchase.
Diagnosis

Symptoms and faults resolved by flow meter 87167724000

The flow meter detects the passage of water to activate the domestic hot water. These are the typical symptoms and what to do:

The boiler ignites normally for heating but does not provide domestic hot water when the tap is opened.

Cause: Without a signal from the turbine, the PCB does not recognize that domestic hot water is being requested and does not activate that function.

Make sure the problem is only with the domestic hot water and not with the heating before looking at this part.

When I turn on the tap, nothing happens for a few seconds, as if the boiler doesn't notice.

Cause: The turbine takes longer to generate a reliable signal if it is dirty or partially blocked, delaying the demand notification to the PCB.

Time how long it takes to react and see if it improves by opening the tap fully before replacing the sensor.

An error code related to water flow appears on the screen.

Cause: The PCB constantly monitors the signal from this turbine; if it is erratic or absent, it registers it as a flow fault.

Check the mesh filter that is usually located just before the turbine, as it often gets clogged with lime or debris.

The domestic hot water comes and goes intermittently, without any apparent reason.

Cause: A turbine with a partially jammed impeller generates irregular pulses that the PCB interprets as flow interruptions.

Check if the fluctuations coincide with drops in the main network pressure before replacing the part.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for Junkers flow meter 87167724000

OEM reference
87167724000
Brand
Junkers
Type of part
Flow Detectors
Units in stock
5 units
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Bosch/OEM number printed on label
8 717 002 132
label
Component code (label)
ELK-0602
label
Manufacturer
Saginomiya
label
Before purchasing
  • There are several equivalent references for this same part (87167724000, 8717002132, 87170021320, 8716772400); check which one your boiler has before ordering.
  • Below the text 'MADE IN JAPAN' on the label, there is an additional line in red, very small, that could not be reliably read.
Frequently Asked Questions

Frequently Asked Questions about Flow Meter 87167724000

Is the flow turbine Ref. 87167724000 an original Bosch/Junkers part?
The Saginomiya factory (code ELK-0602); Bosch/Junkers distributes it with the number 8 717 002 132, equivalent to reference 87167724000.
Is this fan suitable for a Junkers Cerapur or Ceraclass boiler?
Yes, it is compatible with the Cerapur, Ceraclass, Ceranorm, ZWB, ZWC, and ZWN series.
Are the codes 87167724000 and 8717002132 the same part?
Yes, they are equivalent according to technical reference arbitration, with high confidence.
What does the code ELK-0602 engraved on this turbine mean?
It is the manufacturer code that Saginomiya prints on the part's label.
Is this fan also suitable for an Elm Leblanc or a Saunier Duval Suprapur?
Yes, there is a registered equivalence with Elm Leblanc (models ACLEISGLMV5, MEGALISNCGLA24, and ODEALISGVTC24) and Saunier Duval Suprapur Combi 20 and Combi 30.
Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model