Ferroli Divatop Low NOx F24 PCB
Divatop presents the Ferroli Divatop Low NOx F24 PCB, manufactured by Bertelli & Partners with the reference I39828411. This control board manages functions such as ignition, burner modulation, the pump, and the safety features of the boiler. If it fails, you will notice that the boiler does not start, locks out, or operates erratically, displaying fault codes F50 or F51. It is compatible with models such as Divatop F37, Divatop Low Nox F24, Divatop Low Nox F32, among others. It is recommended to replace it when you experience these issues or faults.
VAT included
Consult via WhatsAppFerroli boilers compatible with reference I39828411
PCB with reference I39828411. Nine verified compatibilities: Divatop F37 and Divatop Low Nox F24.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Ferroli Divatop F37 | Divatop | Contrasted |
| Ferroli Divatop Low NOx F24 | Divatop | Contrasted |
| Ferroli Divatop Low NOx F32 | Divatop | Contrasted |
| Ferroli Divatop Micro F32 | Divatop | Contrasted |
| Ferroli Divatop 60 F24 | Divatop | Contrasted |
| Ferroli Divatop 60 F32 | Divatop | Contrasted |
| Ferroli Ferdigit PW F32 | Ferdigit | Contrasted |
| Ferroli Ferdigit Micro F24 | Ferdigit | Contrasted |
| Ferroli Ferdigit F24 | Ferdigit | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. I39828411 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference I39828411. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the PCB I39828411 resolves
The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler does not ignite, there are no lights or response.
Cause: The PCB is not sending current to the control circuits.
Check if there is power at the input and inspect the internal fuse of the PCB.
- 02
The fault code appears randomly or blinks.
Cause: The control electronics receive incorrect signals from the connected sensors.
Note the exact code and reset before deciding whether it is the PCB or the sensor that is faulty.
- 03
The remote control or the thermostat does not work with the boiler even though it has power.
Cause: The PCB does not receive commands from the remote control if there is a communication fault.
Check the wiring and the connector of the remote control before replacing the PCB.
- 04
The boiler starts and shuts down by itself after a few seconds.
Cause: The PCB does not maintain the flame safety signal for the required time and cuts off the gas.
Check the ionization electrode and its wiring before declaring the PCB faulty.
- 05
The fuse blows every time the boiler is refilled.
Cause: Indicates a short circuit or overload in a component connected to the PCB (pump, fan, gas valve).
Disconnect the pump and fan one by one and check if the fuse holds before replacing the PCB.
Fault codes for Ferroli that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| F50 | Internal error of the control board | An internal error has occurred in the DBM32 control board. This may affect the operation of the boiler. It is advisable to contact a specialized technician. |
| F51 | Internal error of the control board | An internal error has occurred in the DBM32 control board. This may affect the operation of the boiler. It is advisable to contact a specialized technician. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Ferroli PCB I39828411
- Catalogue reference
- I39828411
- Brand
- Ferroli
- Type of part
- PCBs (control boards)
- Units in stock
- 6 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Component code on PCB
- DBM03B
- Internal code DIM
- DIM543-FE01
- Voltage
- 230V
- Possible batch or unit marking
- 8199706208
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Ferroli Divatop Low NOx F24 Manual (PDF)Document © Ferroli, provided as a technical reference.
Frequently asked questions about the PCB I39828411
Does this PCB work for a Ferroli Divatop Low NOx F32?
What voltage does the PCB of the Divatop F24 operate at?
Spare parts related to Ferroli Divatop
