Ferroli Domina Oasi / Domitop 24-30 PCB (PMF03F.1) Ref. 39807680

Ferroli Domina Oasi / Domitop 24-30 PCB (PMF03F.1) Ref. 39807680

70 €VAT includedTemporarily out of stock

PCB for Ferroli boilers from the Domina Oasi, Domitop, Ferella Boil, Noxia, PX Flow, and Tempra ranges. The available photo of this unit shows the board from an angle where no code label or manufacturer logo is visible, only relays and capacitors without a legible brand. No technical data is established with the available material.

Spare parts related to Ferroli Ferroli Domina Oasi

Compatibility

Ferroli boilers compatible with reference 39807680

PCB with reference 39807680. Ten confirmed compatibilities with two independent sources: Domina Oasi F24E and Domina Oasi F30E. Verify the printed reference on your part before purchasing.

Compatibility confirmed

Boiler modelFamilyVerification
Ferroli Domina Oasi F24EFerroli Domina OasiConfirmed · 2 sources
Ferroli Domina Oasi F30EFerroli Domina OasiConfirmed · 2 sources
Ferroli Domina Oasi C24EFerroli Domina OasiConfirmed · 2 sources
Ferroli Domina Oasi C30EFerroli Domina OasiConfirmed · 2 sources
Ferroli Domina Oasi F24Ferroli Domina OasiConfirmed · 2 sources
Ferroli Domina Oasi F30Ferroli Domina OasiConfirmed · 2 sources
Ferroli Domitop HF 24EFerroli DomitopConfirmed · 2 sources
Ferroli Domitop HF 30EFerroli DomitopConfirmed · 2 sources
Ferroli Domitop HC 24EFerroli DomitopConfirmed · 2 sources
Ferroli Domitop HC 30EFerroli DomitopConfirmed · 2 sources

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 39807680 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Locate the reference printed on the body of the PCB you have installed: it should indicate 39807680.
  2. Check your boiler model on the nameplate and look for it in the list of compatible models on this page.
  3. Compare the connections and the body with the original part before installing.
  4. If you have any doubts, send us a photo of the screen printing via WhatsApp and we'll confirm it for you before you purchase.
Diagnosis

Symptoms and faults resolved by PCB 39807680

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

The boiler is completely dead: no indicator lights turn on and it doesn't respond to the thermostat.

Cause: When the fault is in the main PCB, the boiler loses overall control and does not respond to any commands.

Check the fuse on the PCB and the boiler's power supply; a blown fuse causes exactly this symptom.

The display shows a fault code that does not correspond to any external component already checked.

Cause: A code without a clear external cause usually indicates that the fault lies in the electronic management of the PCB itself.

Compare the code with the Ferroli manual for this range before deciding on the replacement.

The boiler ignites but turns off by itself after a few seconds or minutes.

Cause: The PCB manages the ignition and safety sequence; if it misinterprets a signal, it cuts off the supply even if the rest of the equipment is functioning properly.

First, rule out a fault with the temperature sensor or water pressure sensor, as they cause the same symptom without the PCB being faulty.

The remote control or the thermostat cannot change anything on the boiler.

Cause: If the PCB does not process the commands it receives properly, the boiler stops responding even though the control works correctly.

Test the thermostat or control on another unit if possible, to rule out that the fault is there and not in the PCB.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Ferroli PCB (control board) datasheet 39807680

OEM reference
39807680
Brand
Ferroli
Type of part
PCBs (control boards)
Units in stock
0 units
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days
Before purchasing
  • The manufacturer of the component is not listed in the available material for this unit; in other photos of the same product, a Honeywell logo is mentioned, but it could not be confirmed in this datasheet.
  • The component code is not included in this frame: the reference label is not visible, only relays and capacitors without a readable brand.
  • The catalog reference could not be verified against the physical label of this unit.
Frequently Asked Questions

Frequently Asked Questions about PCB 39807680

Is it known which manufacturer makes the PCB Ref. 39807680 for the Ferroli Domina Oasi F24E?
It is not confirmed; there is an unverified mention of Honeywell in another photo of the same product, but the material does not support it with certainty.
What code is engraved on this PCB of the Ferroli Domina Oasi F24E?
Not available: the code label is not visible in the available photo.
Is this PCB suitable for a Ferroli Domitop HF 24?
Yes, the Domitop HF 24 is on the list of compatible boilers.
How do I confirm that this PCB is the correct one for my Ferroli Tempra 12 before ordering it?
Physically compare your PCB (connectors, relays, capacitors) with the photos in the listing, as the reference is not verified.
Is this PCB also suitable for a Ferroli Noxia NF 30/55?
Yes, the Noxia NF 30/55 is listed as a compatible boiler.
Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model