Chaffoteaux Pressure Gauge 0-4 Bar 42mm Celtic / TIG Ref. 60081180
Pressure gauge indicating the pressure of the heating circuit in Chaffoteaux Celtic boilers. The scale ranges from 0 to 4 bar, and the dial diameter is 42 mm, both data confirmed by two independent sources. The manufacturer of this part is not specified in the analyzed photos.
Spare parts related to Chaffoteaux Chaffoteaux Celtic
Chaffoteaux boilers compatible with reference 60081180
Pressure gauge with reference 60081180. Ten confirmed compatibilities with two independent sources: TIG 35 HP CF and TIG 30. Verify the printed reference on your part before purchasing.
Compatibility confirmed
| Boiler model | Family | Verification |
|---|---|---|
| Chaffoteaux TIG 35 HP CF | Chaffoteaux TIG | Confirmed · 2 sources |
| Chaffoteaux TIG 30 | Chaffoteaux TIG | Confirmed · 2 sources |
| Chaffoteaux TIG 20 | Chaffoteaux TIG | Confirmed · 2 sources |
| Chaffoteaux TIG HP | Chaffoteaux TIG | Confirmed · 2 sources |
| Chaffoteaux Celtic TIG 30 | Chaffoteaux Celtic | Confirmed · 2 sources |
| Chaffoteaux Celtic TIG 20 | Chaffoteaux Celtic | Confirmed · 2 sources |
| Chaffoteaux Celtic HP | Chaffoteaux Celtic | Confirmed · 2 sources |
| Chaffoteaux Celtic RSc | Chaffoteaux Celtic | Confirmed · 2 sources |
| Chaffoteaux Celtic Turbo | Chaffoteaux Celtic | Confirmed · 2 sources |
| Chaffoteaux GM RSc | Chaffoteaux GM | Confirmed · 2 sources |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 60081180 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Locate the reference printed on the body of the pressure gauge you have installed: it should indicate 60081180.
- Check your boiler model on the nameplate and look for it in the list of compatible models on this page.
- Compare the connections and the body with the original part before installing.
- If you have any doubts, send us a photo of the screen printing via WhatsApp and we'll confirm it for you before you purchase.
Symptoms and faults resolved by pressure gauge 60081180
The pressure gauge shows the pressure of the boiler circuit. These are the typical symptoms and what to do:
The needle doesn't move, regardless of the installation.
Cause: The internal mechanism seizes up with the limescale from the heating water and stops responding to the actual pressure.
Bleed a radiator and check if the needle moves even slightly before replacing the part.
Mark outside the normal range of the scale, very high or stuck at the bottom
Cause: With wear, the spring loses its proper travel, and the needle stops reflecting the actual pressure.
Compare with the usual cold installation pressure to see if the deviation is from the circuit or the appliance itself.
There is a water leak behind the pressure gauge, at the brass fitting.
Cause: The fitting gasket dries out with the heat cycles and eventually starts leaking water.
Tighten the fitting carefully, without overdoing it, and dry the area: if the leak reappears soon, it's the gasket, not the body.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Chaffoteaux 60081180 pressure gauge datasheet
- OEM reference
- 60081180
- Brand
- Chaffoteaux
- Type of part
- Pressure gauges - Aquastats
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- pressure
- 0-4 bar
label+sources - diameter
- 42 mm
sources
- The manufacturer of this part is not indicated in the analyzed photos; it cannot be identified by brand.
- The manufacturer's code is not known; check that catalog reference 60081180 matches your part before ordering.
- The part does not have legible markings in the analyzed photos.