Daikin Sensira TXF50F 1x1 split air conditioning · 4,300 frigorías
1×1 Daikin Sensira with 5.00 kW in cooling (approximately 4,300 BTU/h) and 6.00 kW in heating.
- Pipe
- 1/4″ / 1/2″
- Wi-Fi
- Yes, included.
- BTU/h
- ≈ 4.300
- Refrigerant
- R32
VAT and shipping to mainland Spain included. Installation not included.
VAT includedAvailable in stock
What does Daikin TXF50F include?
Indoor unit, outdoor unit, and control of the indicated set.
| Model | Component | Supply scope |
|---|---|---|
| FTXF50F | Indoor unit | 1 included |
| RXF50D/F | Outdoor unit | 1 included |
| ARC480A93 | Infrared remote control included | 1 included |
Daikin outdoor documentation RXF50D and RXF50F for this set. Dimensions, weight, and load are indicated separately for each revision.
Cover: illustration of the range based on catalog photos, without scale. The individual images retain the reference photos. The design of the control may vary due to catalog updates.
What to check before installing Daikin TXF50F?
The choice of equipment does not replace the inspection of the installation by a qualified professional.
- Interior: 770 × 286 × 225 mm. Exterior RXF50D: 870 × 734 × 373 mm; RXF50F: 923 × 610 × 367 mm. Also reserve the installation clearances from the manual.
- Refrigerant line 1/4″ / 1/2″; run up to 30 m and elevation up to 20 m. Pre-charge for 10 m; check the additional charge in the manual.
- The nominal power guides the selection; the thermal load calculation and installation are carried out separately.
Technical sheet: Daikin TXF50F
- Brand
- Daikin
- Model and composition
- Daikin TXF50F
- Supply scope
- FTXF50F + RXF50D/F + ARC480A93
- Installation
- Not included
- Availability and transport
- In stock. VAT and shipping to mainland Spain included. Installation not included.
Installation at a glance
- Interior
- 770 × 286 × 225 mmwidth × height × depth
- Exterior
- RXF50D: 870 × 734 × 373 mm; RXF50F: 923 × 610 × 367 mmwidth × height × depth
- Pipe · liquid / gas
- 1/4″ / 1/2″
- Acceptable travel distance
- 3 m–30 m
- Maximum slope
- 20 m
- Factory published load
- RXF50D: 0.90 kg; RXF50F: 0.80 kg
- Length covered by precharge
- 10 m
- Additional load
- 20 g/m above 10 mCheck the manual of the provided revision.
Specifications and dimensions of the model
Capabilities, consumption, efficiency, noise, and dimensions of this set. The testing conditions and climate are part of each value.
- Set
- TXF50F
Identification and control - Indoor unit
- FTXF50F
Identification and control - Outdoor unit
- RXF50D/F
Identification and control - Type
- 1×1 split wall-mounted unit · cooling and heating
Identification and control - Published supply
- 220 V · single-phase
Identification and control - Infrared remote control
- ARC480A93
Identification and control · The design of the control may vary due to catalog updates. - Connectivity
- Wi-Fi control with the Onecta app included.
Identification and control · Daikin Spain · tariff update 2025 · PDF page 15. - Nominal power in cold conditions
- 5.00 kW
Power and efficiency - approximate nominal cooling capacity
- 4,300 FRIGORÍAS/h
Power and efficiency · Indicative conversion: kW × 860. - Nominal heat output
- 6.00 kW
Power and efficiency - Energy class in cold
- A++
Power and efficiency - Energy class in heating
- A+ · average climate
Power and efficiency - SEER
- 6,21
Power and efficiency - SCOP · average climate
- 4,06
Power and efficiency - Interior · width × height × depth
- 770 × 286 × 225 mm
Dimensions and sound - Exterior · width × height × depth
- RXF50D: 870 × 734 × 373 mm; RXF50F: 923 × 610 × 367 mm
Dimensions and sound · Two documented reviews. Use the measurements from the supplied external reference. - Internal weight
- 9.0 kg
Dimensions and sound · FTXF50F5V1B, according to the current Daikin table. - External weight
- RXF50D: 46 kg; RXF50F: 40 kg
Dimensions and sound - Interior sound pressure in silent mode
- 31 dB(A)
Dimensions and sound · Sound pressure level, not sound power. - Pipe · liquid / gas
- 1/4″ / 1/2″
Pipe and refrigerant - Acceptable travel distance
- 3 m–30 m
Pipe and refrigerant - Maximum slope
- 20 m
Pipe and refrigerant - Refrigerant
- R32
Pipe and refrigerant - Factory published load
- RXF50D: 0.90 kg; RXF50F: 0.80 kg
Pipe and refrigerant - Length covered by precharge
- 10 m
Pipe and refrigerant - Additional load
- 20 g/m above 10 m
Piping and refrigerant · Check the manual provided for the review. - Cooling
- 1500 W
Nominal electrical consumption · Nominal electrical power, not thermal capacity. - Heating
- 1620 W
Nominal electrical consumption · Nominal electrical power, not thermal capacity. - Cooling
- 282 kWh/year
Annual reference consumption - Heating · average climate
- 1,585 kWh/year
Annual reference consumption - Residential use
- 3 years
Daikin warranty · According to the manufacturer's conditions. - Other uses
- 2 years of material replacement
Daikin warranty · Check the scope and exclusions in the Daikin terms and conditions.
Before purchasing
- Daikin Spain, tariff update 2025, PDF page 15. Nominal testing capacities; dimensions in width × height × depth.
Documentation
Questions about Daikin TXF50F
How many cooling capacity (FRIGORÍAS) does the Daikin TXF50F have?
Approximately 4,300 FRIGORÍAS/h, calculated from the 5.00 kW nominal cooling capacity. This is not its electrical consumption.
What units are included?
It is the 1×1 set with interior FTXF50F and exterior RXF50D/F. The inspection of the outdoor unit is confirmed upon delivery.
What pipe do you need?
Liquid and gas: 1/4″ / 1/2″. The maximum published distance is 30 m; the installation requires checking the exact manual.
Is the installation included?
No. Piping, supports, installation, and commissioning are valued separately.
Services for your air conditioning
Daikin Sensira TXF50F 1x1 split air conditioning · 4,300 frigorías