Air conditioning repair
Resolving a malfunction.
Technical Service · Uniclima
The choice between split, multisplit, ducted, and cassette systems depends on the rooms, the layout, and the available space. The budget should describe the actual installation and not just the power of the equipment.

Tell us what is happening, when it started, and if a fault code appears. Brand, model, and exterior photographs help prepare the consultation. The diagnosis determines if it is advisable to repair; an isolated symptom does not confirm a faulty part.
If the equipment is functioning, compare the scope of a review and the conditions of maintenance. Cleaning, checks, spare parts, and corrective visits are not the same: review what the proposal includes before contracting.
La selección del equipo y su instalación deben adaptarse al hogar. Solicite un alcance que separe el suministro, las conexiones, las adaptaciones y la puesta en marcha. Si está considerando reparar o reemplazar, compare ambas estimaciones con el estado del equipo actual.
Explore the catalog by brand, model, and budget. Check dimensions, features, and documentation for each boiler. The purchase of the equipment does not include installation: you can inquire about that service separately.
También puedes renovar tu equipo.










VAT included. Installation not included.
Scope: split, multisplit, ducted, and cassette systems, following identification of the installation. Airflow, condensate drainage, power supply, and control must be evaluated along with the refrigeration circuit; not every loss of performance implies a lack of refrigerant.

Please indicate usage, orientation, surface area, and layout of the rooms. Demand and simultaneity influence the selection; the same system is not proposed for a single room, several independent rooms, or a house with ducts.
The assessment covers unit positions, maintenance access, refrigerant pipe routes, power supply and condensate drainage. Where these affect the facade, roof or shared parts of the building, the applicable permissions and conditions must be checked before work starts.
The document must identify references for units, materials, lengths, and included work, ducting, supports, drainage, and commissioning. Auxiliary means, construction, and new electrical circuits require an explicit definition. The cost of the device alone should not be compared.
Final checks and adjustments are made according to the equipment and the intervention. Request instructions for use, accessible cleaning, and maintenance. The user should not open the refrigeration circuit or access electrical components to check the installation.
Add locality and access conditions. Only send photographs that you can take without disassembling equipment or exposing yourself to risks.
Your questions answered
Faults, installation, maintenance, and purchasing new equipment: find answers for your system and prepare your inquiry.
No. It depends on routes, location, simultaneous demand, and available configuration. It is advisable to compare alternatives with the same installation scope.
Photographs can help prepare the inquiry, but a visit may be necessary to confirm measurements, access, and routes before finalizing the scope.
The drainage of condensates is part of the conditions that must be resolved according to the equipment and its operation. It should not remain as a pending detail after the installation.
Indicate the equipment, brand, model, locality, and what you need: repair, install, or maintain. Add access conditions if they affect the intervention. The page describes the service; availability, scope, and the visit are confirmed upon inquiry.
Solicite el alcance por escrito: diagnóstico, desplazamiento, mano de obra, materiales y posibles trabajos adicionales. Verifique qué está incluido y qué está excluido, los impuestos y las condiciones aplicables. Si el diagnóstico cambia la propuesta, pida confirmación antes de autorizar nuevas acciones.
No. Buying the boiler and having it installed are separate services. The product page shows the model's price and what is supplied. Installation requires assessment of the location, connections, flue and any necessary adaptations. Ask for the two costs separately before deciding.
An overview of the equipment, its model label, and the warning displayed on the screen. In a replacement, the connections and the space around it are also helpful, always from a safe position. Do not remove casings or protections to take photos; avoid including unnecessary personal data.
No. El problema necesita diagnóstico. Indíquenos qué modo está seleccionado, qué sucede en cada unidad, cualquier advertencia y cuándo comenzó el problema. No asuma que una recarga de refrigerante es la solución. La causa debe ser identificada primero; si se confirma la pérdida de refrigerante, se debe evaluar su origen y la reparación necesaria.
Indique dónde aparece el agua, en qué modo y después de cuánto tiempo de uso. Una foto exterior del punto de goteo y el camino de drenaje visible puede ayudar. No desmonte la unidad ni toque conexiones eléctricas húmedas; se debe verificar la causa antes de proponer la reparación.
An isolated figure does not define the work. First, the equipment, refrigerant, diagnosis, and scope must be identified, including the possible location and repair of a leak. Request a detailed proposal; it is not assumed that a recharge is necessary or that it will resolve the fault by itself.
Depende de la compatibilidad específica entre las unidades interiores y exteriores y la instalación. No es suficiente que sean de la misma marca o que tengan potencias similares. Proporcione las etiquetas de todas las unidades para evaluar las combinaciones permitidas por el fabricante.
Es un punto de datos inicial, no una selección completa. La orientación, el aislamiento, las ventanas, el uso, la ocupación y la distribución también son importantes. Describe las habitaciones que deseas climatizar y cómo se utilizan; la elección debe considerar el conjunto y no aplicar una cifra universal a cualquier hogar.
No se trata de revisar todo el sistema. Las tareas que el usuario puede realizar son las indicadas en el manual; otras requieren intervención técnica. Consulte un alcance que diferencie limpieza, drenaje, operación y verificaciones, y aclare lo que no está incluido en el servicio contratado.
No necesariamente. La referencia y el código completo ayudan a guiar la consulta, pero deben ser verificados contra las unidades y la instalación. No se puede confirmar una placa defectuosa o su recambio sin un diagnóstico y una identificación exacta; consulte al laboratorio si está considerando reparar la electrónica.
La ubicación, la ventilación, el acceso seguro para el mantenimiento, el drenaje y el enrutamiento de las conexiones. Comunicar cualquier restricción de construcción o acceso antes de presupuestar. La viabilidad y cualquier permiso necesario deben aclararse para la ubicación específica.
No hay respuestas con estos filtros. Intenta con otra palabra o muestra todas las preguntas.
Resolving a malfunction.
Check preventive operations and limits.
From symptom to next step

Read the blog guide and prepare your questions about the equipment, available space and installation.
Read the blog guide →Decide with information
Split, multisplit, and ducted systems require identifying units and zones. Keep the references for both the indoor and outdoor units.
Dripping, noise, lockouts, or poor cooling help explain the problem, but do not alone justify a refrigerant recharge or a PCB replacement.
La ubicación de las unidades, tuberías y desagües afecta la reparación e instalación. Mencione si hay techos falsos o acceso a altura.
It makes sense to consider repair when the fault is localized, there is a compatible spare part, and the rest of the equipment is in good working condition. Request diagnosis, scope, and cost before deciding.
It is advisable to compare alternatives if there are recurring faults, if a spare part cannot be obtained, or if the equipment no longer meets your needs. Include installation adaptations in the comparison; the price of the unit is not the total cost of the change.
No hay un porcentaje universal de ahorro o número de años que mandate el reemplazo. La decisión requiere evaluar el equipo y su instalación.