The design of the remote control may vary due to catalog updates.
Hisense ADT71 ducted air conditioning — 6,020 COOLING CAPACITY/h
Hisense ducted unit single-phase: 7.00 kW in cooling and 8.00 kW in heating, approximately 6,020 BTU/h. R32 and optional Wi-Fi.
- Pipe
- 3/8″ / 5/8″
- Wi-Fi
- Optional
- BTU/h
- ≈ 6.020
- Refrigerant
- R32
Out of stock. We will notify you by email when it becomes available again.
VAT includedOUT OF STOCK
What does Hisense ADT71UX4RCL8 + AUW71U4RJ7 include?
Exact combination documented by Hisense: ADT71UX4RCL8 + AUW71U4RJ7.
| Model | Component | Supply scope |
|---|---|---|
| ADT71UX4RCL8 | Ducted indoor unit 1180 × 190 × 447 mm | 1 included |
| AUW71U4RJ7 | Outdoor unit 860 × 670 × 310 mm | 1 included |
| Wired and wireless control | Equipment control The image shows the control of the range. The design may vary due to catalog updates. | 1 included |
Installation, pipes, supports, and construction materials not included. The duct network is sized separately.
Illustrative composition of the range, not to scale. The design of the control may vary due to catalog updates.
What to check before installing Hisense ADT71UX4RCL8 + AUW71U4RJ7
The choice of equipment does not replace the inspection of the installation by a qualified professional.
- Check the dimensions and leave access for connections, filter cleaning, and condensate pump maintenance.
- The installer must calculate the thermal load and check the air distribution and drainage.
- Check the 3/8″ / 5/8″ pipes, the slope, and the single-phase power supply before installation.
Technical sheet: Hisense ADT71UX4RCL8 + AUW71U4RJ7
- Brand
- Hisense
- Model and composition
- Hisense ADT71UX4RCL8 + AUW71U4RJ7
- Supply scope
- Indoor unit, outdoor unit, wired and wireless control.
- Installation
- Not included
- Availability and transport
- Out of stock. Reserve the notification by email to know when it will be available again. Installation not included.
Installation at a glance
- Interior
- 1180 × 190 × 447 mmwidth × height × depth
- Exterior
- 860 × 670 × 310 mmwidth × height × depth
- Factory published load
- 1.50 kgHisense Spain catalog
- Pipe · liquid / gas
- 3/8″ / 5/8″
- Maximum length
- 45 m
- Maximum slope
- 30 m
- Length covered by precharge
- 5 m
- Additional load
- 35 g/mBased on the preloaded length
Specifications and dimensions of the model
Capabilities, consumption, efficiency, noise, and dimensions of this set. The testing conditions and climate are part of each value.
- Nominal cooling of the unit
- 7.00 kW
Power and efficiency of the system - Nominal heat of the assembly
- 8.00 kW
Power and efficiency of the system - BTU/h
- ≈ 6.020
Power and efficiency of the system · Conversion of nominal capacity in cooling: kW × 860 - SEER / SCOP
- 6,30 / 4,10
Power and efficiency of the system · SCOP in moderate climate - Cold efficiency
- A++
Power and efficiency of the system - Efficiency in heat
- A+
Power and efficiency of the system · Average climate - Nominal consumption in cold / heat
- 2.26 / 2.40 kW
Power and efficiency of the system · Absorbed electrical power - Interior · width × height × depth
- 1180 × 190 × 447 mm
Dimensions, sound and flow rate - Exterior · width × height × depth
- 860 × 670 × 310 mm
Dimensions, sound and flow rate - Net weight indoor unit
- 24.5 kg
Dimensions, sound and flow rate - Interior sound pressure
- 42 / 38 / 34 dB(A)
Dimensions, sound and flow · High / medium / low - Indoor air flow
- 1000 / 900 / 800 m³/h
Dimensions, sound and flow · High / medium / low - Static pressure
- 35 Pa
Dimensions, sound and flow · Adjustable from 0 to 50 Pa - Refrigerant
- R32
Installation and refrigerant - Factory published load
- 1.50 kg
Installation and refrigerant · Hisense Spain Catalog - Pipe · liquid / gas
- 3/8″ / 5/8″
Installation and refrigerant - Maximum length
- 45 m
Installation and refrigerant - Maximum slope
- 30 m
Installation and refrigerant - Length covered by precharge
- 5 m
Installation and refrigerant - Additional load
- 35 g/m
Installation and refrigerant · Based on the pre-charged length - Power supply
- Single-phase · 220–240 V · 50/60 Hz
Installation and refrigerant - Wi-Fi
- Optional
Installation and refrigerant · Adapter not included - Condensate pump
- Included
Installation and refrigerant - Warranty
- 3 years
Installation and refrigerant · According to Hisense conditions and applicable use
Before purchasing
- Exact combination data in the Hisense documentation. Please refer to the installation manual of the supplied revision.
Documentation
Questions about Hisense ADT71UX4RCL8 + AUW71U4RJ7
What units are included?
ADT71UX4RCL8 + AUW71U4RJ7. Indoor unit, outdoor unit, wired and wireless control.
How many frigorías does it have?
7.00 kW nominal in cold, approximately 6,020 refrigeration units/h.
Does it include Wi-Fi and installation?
No. The Wi-Fi requires an optional adapter and the installation is quoted separately.
What power supply does it need?
This combination is single-phase. The external reference is AUW71U4RJ7.
Services for your air conditioning
Hisense ADT71 ducted air conditioning — 6,020 COOLING CAPACITY/h