The design of the remote control may vary due to catalog updates.
Hisense AUD90 ducted air conditioning — 7,568 BTU/h
Hisense ducted set with 8.80 kW in cooling and 9.00 kW in heating, equivalent to 7,568 frigorías/h. Single-phase and refrigerant R32.
- Pipe
- 3/8″ / 5/8″
- Wi-Fi
- Optional
- BTU/h
- ≈ 7.568
- Refrigerant
- R32
Out of stock. We will notify you by email when it becomes available again.
VAT includedOUT OF STOCK
What is included in Hisense AUD90UX4RDH5 + AUW90U4RF4?
1×1 pair documented by Hisense: one indoor unit AUD90UX4RDH5 and one outdoor unit AUW90U4RF4.
| Model | Component | Supply scope |
|---|---|---|
| AUD90UX4RDH5 | Ducted indoor unit 1140 × 268 × 720 mm · 37.5 kg | 1 included |
| AUW90U4RF4 | Outdoor unit 860 × 670 × 310 mm · 49 kg | 1 included |
| Wired and wireless control | Control knobs Supply indicated in the manufacturer's technical documentation. The photo shows a control from the range. | 1 included |
Installation, duct network, pipes, supports, and construction materials not included.
Illustrative composition of the range, not to scale. The design of the control may vary due to catalog updates.
What to check before installing Hisense AUD90UX4RDH5 + AUW90U4RF4
The choice of equipment does not replace the inspection of the installation by a qualified professional.
- Space and maintenance: Check the dimensions of both units and reserve space for the filter, connections, and condensate pump.
- Duct network: The installer must calculate the thermal load and pressure losses. It is not sized solely by square meters.
- Connections: Check the 3/8″ and 5/8″ line, the slope, the drainage, and the single-phase supply before installation.
Hisense AUD90UX4RDH5 + AUW90U4RF4
- Brand
- Hisense
- Model and composition
- Hisense AUD90UX4RDH5 + AUW90U4RF4
- Supply scope
- Indoor unit, outdoor unit, and controls according to the manufacturer's documentation.
- Installation
- Not included
- Availability and transport
- Out of stock. Reserve the notification by email to know when it will be available again. Installation not included.
Installation at a glance
- Interior
- 1140 × 268 × 720 mmwidth × height × depth
- Exterior
- 860 × 670 × 310 mmwidth × height × depth
- Factory published load
- 1.45 kgFactory load
- Pipe · liquid / gas
- 3/8″ / 5/8″
- Maximum length
- 50 m
- Maximum slope
- 30 m
- Length covered by precharge
- 5 m
- Additional load
- 35 g/mBased on the preloaded length
Specifications and dimensions of the model
Capabilities, consumption, efficiency, noise, and dimensions of this set. The testing conditions and climate are part of each value.
- Nominal cooling of the unit
- 8.80 kW
Power and efficiency of the unit · Range 4.00–9.50 kW - Nominal heat of the assembly
- 9.00 kW
Power and efficiency of the set · Range 3.50–9.40 kW - BTU/h
- ≈ 7.568
Power and efficiency of the system · Conversion of nominal capacity in cooling: kW × 860 - SEER / SCOP
- 6,20 / 4,00
Power and efficiency of the system · SCOP in moderate climate - Efficiency in cold / heat
- A++ / A+
Power and efficiency of the system · Average climate - Nominal consumption in cold / heat
- 2.67 / 2.40 kW
Power and efficiency of the system · Absorbed electrical power - Interior · width × height × depth
- 1140 × 268 × 720 mm
Dimensions, sound and flow rate - Net weight indoor unit
- 37.5 kg
Dimensions, sound and flow rate - Exterior · width × height × depth
- 860 × 670 × 310 mm
Dimensions, sound and flow rate - Net weight outdoor unit
- 49 kg
Dimensions, sound and flow rate - Interior sound pressure
- 42 / 39 / 35 dB(A)
Dimensions, sound and flow · High / medium / low speeds - External sound pressure
- 51 dB(A)
Dimensions, sound and flow rate - Indoor air flow
- 1450 / 1120 / 900 m³/h
Dimensions, sound and flow · High / medium / low - Static pressure
- 100 Pa
Dimensions, sound and flow · Adjustable from 0 to 150 Pa - Refrigerant
- R32
Installation and refrigerant - Factory published load
- 1.45 kg
Installation and refrigerant · Factory charge - Pipe · liquid / gas
- 3/8″ / 5/8″
Installation and refrigerant - Maximum length
- 50 m
Installation and refrigerant - Maximum slope
- 30 m
Installation and refrigerant - Length covered by precharge
- 5 m
Installation and refrigerant - Additional load
- 35 g/m
Installation and refrigerant · Based on the pre-charged length - Power supply
- Single-phase · 220–240 V · 50 Hz
Installation and refrigerant - Wi-Fi
- Optional
Installation and refrigerant · Adapter not included - Condensate pump
- Included
Installation and refrigerant - Warranty
- 3 years
Installation and refrigerant · According to Hisense conditions and applicable use
Before purchasing
- Exact combination data in the Hisense technical sheet and the 2025 catalog. Not extrapolated to models with other suffixes.
Documentation
Questions about Hisense AUD90UX4RDH5 + AUW90U4RF4
What units make up this equipment?
AUD90UX4RDH5 + AUW90U4RF4. The set includes a ducted indoor unit and an outdoor unit.
How many frigorías does it have?
Its nominal cooling capacity is 8.80 kW, approximately 7,568 BTU/h.
Does it include Wi-Fi and installation?
No. The Wi-Fi requires an optional adapter and the installation is quoted separately.
Services for your air conditioning
Hisense AUD90 ducted air conditioning — 7,568 BTU/h