Representación ilustrativa Multisplit 2×1: MXZ-2F42VF + MSZ-AY25VGK + MSZ-AY35VGK. Capacidad en frío compartida: 4.2 kW, aproximadamente 3612 frigorías por hora. Capacidad en calor: 4.5 kW. Render basado en fotografías de referencia; originales en la galería, no a escala.
NewMitsubishi ElectricMultisplit 2×1

Multisplit 2×1 Mitsubishi Electric MXZ-2F42VF + MSZ-AY25VGK + MSZ-AY35VGK

Shipping included to mainland Spain · delivery in 24–48 h. Installation not included.

VAT includedAvailable · delivery in 24–48 h

Multisplit 2×1 Mitsubishi Electric: MXZ-2F42VF + MSZ-AY25VGK + MSZ-AY35VGK. 1 × MXZ-2F42VF (outdoor unit); 1 × MSZ-AY25VGK (wall-mounted indoor unit); 1 × MSZ-AY35VGK (wall-mounted indoor unit); 2 × SH22Q (remote control). Installation not included. The AY25+AY35 combination of the 2F42 distinguishes two indoor classes, but maintains 4.2 kW nominal shared cooling capacity. Choosing different classes does not allow for the summation of their nominal powers as simultaneous capacity. The offer includes 2 indoors (1 × MSZ-AY25VGK + 1 × MSZ-AY35VGK) and one outdoor unit MXZ-2F42VF. That number describes the included parts, not independent 1×1 systems. The selection is made based on the thermal loads of each room and the installation conditions; the indoor classes do not replace that calculation. The 2 indoors include Wi-Fi for connected control and an infrared remote control per unit. You can adjust each room separately; all share the cooling or heating mode of the outdoor unit.

Components and supply

What is included in MXZ-2F42VF + MSZ-AY25VGK + MSZ-AY35VGK?

The composition identifies each reference and quantity. It does not replace the compatibility table for other combinations.

ModelComponentSupply scope
MXZ-2F42VFOutdoor unit
2 connections · MXZ-F range		1 included
MSZ-AY25VGKWall-mounted indoor unit
1 unit included · class 25		1 included
MSZ-AY35VGKWall-mounted indoor unit
1 unit included · class 35		1 included
SH22QControl board
Includes 2 remote controls, one for each indoor unit: 2 × SH22Q.		2 included

Installation and commissioning Refrigerant piping, insulation, wiring, and drainage Supports, ducting, condensate pump, or other installation accessories

The images maintain the reference or family scope indicated in their description; they do not certify stock availability or the serial number that will be supplied.

Guide

What to check before installing MXZ-2F42VF + MSZ-AY25VGK + MSZ-AY35VGK

The choice of equipment does not replace the inspection of the installation by a qualified professional.

  1. Check the references MXZ-2F42VF + MSZ-AY25VGK + MSZ-AY35VGK and review their labels before replacing units.
  2. Evaluate the thermal demand, distribution, insulation, and location before selecting a 2×1 multisplit.
  3. Check dimensions, clearances, power supply, and travel with the specific documentation and a qualified installer.
  4. The budget must separate equipment, materials, assembly, and commissioning.
Technical data

Technical sheet: MXZ-2F42VF + MSZ-AY25VGK + MSZ-AY35VGK

Brand
Mitsubishi Electric
Model and composition
MXZ-2F42VF + MSZ-AY25VGK + MSZ-AY35VGK
Supply scope
1 × MXZ-2F42VF (outdoor unit); 1 × MSZ-AY25VGK (wall-mounted indoor unit); 1 × MSZ-AY35VGK (wall-mounted indoor unit); 2 × SH22Q (remote control)
Installation
Not included
Availability and transport
New equipment available. VAT and shipping included to mainland Spain · delivery in 24–48 h. Installation not included. Not shipped to islands, Ceuta, Melilla, or abroad.

Specifications and dimensions of the model

Capabilities, consumption, efficiency, noise, and dimensions of this pair. The testing conditions and climate are part of each value.

Included exterior
MXZ-2F42VF
Composition of this 2×1
MSZ-AY25VGK indoor unit
1 unit
Composition of this 2×1
MSZ-AY35VGK interior
1 unit
Composition of this 2×1
Total of main equipment
2 interiors + 1 exterior
Composition of this 2×1 · The offer includes 2 indoor units (1 × MSZ-AY25VGK + 1 × MSZ-AY35VGK) and one outdoor unit MXZ-2F42VF. That number describes the included parts, not independent 1×1 systems.
Nominal cooling of the unit
4.2 kW
Nominal capacity of the set · Value of the Nominal column of this combination. It is shared capacity, not the power available independently in each room.
Nominal heat of the assembly
4.5 kW
Nominal capacity of the set · Capacity shared by the interiors, not multiplicable by the number of rooms.
Combination row
25+35
Nominal capacity of the set · Spanish catalog June 2025, PDF 168 / printed 166, MXZ-2F42VF, row 25+35, column Nominal.
Distribution by room
It is not obtained by simple addition or division.
Nominal capacity of the system · It depends on the demand, conditions, and operation of the system.
Commercial composition
Documented in Mitsubishi Electric sources.
Scope of the documentation · The Spanish price list for June 2026 publishes this composition with its commercial references.
Commercial reference abroad
MXZ-2F42VF
Scope of documentation · Commercial reference MXZ-2F42VF. A specific physical review is confirmed in the order, delivery note, and PCB; it is not automatically replaced by another suffix.
Control of the interiors
Integrated Wi-Fi and infrared remote control
Scope of documentation · Each indoor unit has its own control; the system shares the cooling or heating mode.
Installation
Not included
Scope of documentation · Routes, drainage, supply, and location are checked before the installation budget.
Maximum length on the inside
20 m
Refrigeration circuit and slopes · Actual length of each branch, not straight-line distance. The maximum sum of all branches must also be respected.
Maximum total length
30 m
Refrigerant circuit and slopes · Sum of branches of the compatible configuration.
Maximum exterior–interior height difference
15 m
Refrigerant circuit and slopes · The diagram allows for this slope with the outdoor unit either above or below. It does not add to the allowed slope between indoor units.
Maximum difference in height between interiors
10 m
Refrigerant circuit and elevations · According to the system diagram; confirm project limits.
Connections of the exterior · liquid / gas
A/B: 6.35 / 9.52 mm
Refrigerant circuit and slopes · Diameters of the outdoor connections. The piping and adapters are also chosen according to the connected indoor unit; it is not assumed that all system connections have the same diameter.
MSZ-AY25VGK interior · height × width × depth
299 × 798 × 245 mm
Measurements of the units in this set · 1 unit included of this reference: measurements of each body separately, not summed dimensions. Only the body of the interior MSZ-AY25VGK; no mounting cavity or dimensions of the set. Official tables ES and FR match.
MSZ-AY35VGK interior · height × width × depth
299 × 798 × 245 mm
Measurements of the units in this set · 1 unit included of this reference: measurements of each body separately, not summed dimensions. Only the body of the interior MSZ-AY35VGK; no mounting cavity or dimensions of the set. Official tables ES and FR match.
Exterior MXZ-2F42VF · height × width × depth
550 × 800 × 285 mm
Dimensions of the units in this set · Outer body; no mounting space or protrusions to be reserved. Do not use drawing from another revision.
MXZ-2F42VF exterior · net weight
37 kg
Dimensions of the units in this set · Exact base model; not VF2/VF5/VFH. Only outdoor unit, no total weight.
Remote control included
Includes 2 remote controls, one for each indoor unit: 2 × SH22Q.
Remote control and connectivity
Wi-Fi
Integrated Wi-Fi in each indoor unit, with control via MELCloud. No additional adapter purchase is required. The remote control operates via infrared; the Wi-Fi is built into the unit.
Remote control and connectivity
Before purchasing
  • The unit, condition, and source of each value from the original catalog are preserved. The indicated editions and revisions define their scope; missing figures are not completed by analogy. Uniclima's commercial conditions are validated separately.
Documentation

Manuals and technical documentation

Official sources from the manufacturer. Cross-check the model and the revision of the labels of both units.

Frequently Asked Questions

Questions about MXZ-2F42VF + MSZ-AY25VGK + MSZ-AY35VGK

What is included in MXZ-2F42VF + MSZ-AY25VGK + MSZ-AY35VGK?
1 × MXZ-2F42VF (outdoor unit); 1 × MSZ-AY25VGK (wall-mounted indoor unit); 1 × MSZ-AY35VGK (wall-mounted indoor unit); 2 × SH22Q (remote control). The previous composition identifies the units and controls of this offer. The installation is contracted separately.
What measurements should I check before booking the equipment?
Interior MSZ-AY25VGK · height × width × depth: 299 × 798 × 245 mm. Interior MSZ-AY35VGK · height × width × depth: 299 × 798 × 245 mm. Exterior MXZ-2F42VF · height × width × depth: 550 × 800 × 285 mm. These are the dimensions of the indicated components, not the minimum installation space. Also allow for the clearances, connections, and maintenance access required by the manual.
Is Wi-Fi included or is an accessory required?
Integrated Wi-Fi in each indoor unit, with control via MELCloud. No additional adapter purchase is required. The remote control operates via infrared; the Wi-Fi is built into the unit.
What command does the equipment receive?
Includes 2 remote controls, one for each indoor unit: 2 × SH22Q.
In which distribution does the AY 25+35 fit with MXZ-2F42VF?
Class 35 can be allocated to the area with the most sunlight, occupancy, or surface area; class 25, to the area with lower demand. Here, they work with the exterior MXZ-2F42VF, which offers 4.2 kW of nominal cooling for the unit and 4.5 kW of heating. To decide which indoor unit goes in each room, please tell us its dimensions, orientation, and usual use.
Why does it have a 25 and a 35, and not two of the same?
Because it allows you to choose two different indoor units within the same system. Instead of two identical units, it reserves the higher class for the more demanding room; both still share the total capacity of the outdoor unit.
Can I heat just one room?
You can operate each of the 2 indoor units of this AY 25+35 with its remote control, without having to keep all of them on. They share the outdoor unit MXZ-2F42VF: they can work in cooling or heating mode, but cannot cool one room while another is heating. The available capacity depends on which units are operating.
What is the distance from the rooms where I can place the MXZ-2F42VF?
For the exterior MXZ-2F42VF of this set, the manual allows for up to 20 m of indoor piping and 30 m when summing all branches. The maximum height differences are 15 m between exterior and interior and 10 m between interiors. The actual length of the piping is measured, not the straight-line distance. The installer must check the diameters, adapters, bends, load, and equipment inspection: these limits are not installation meters included in the price.

Services for your air conditioning

Complete setCheck references and quantities.
Shipping includedMainland Spain · 24–48 h
Separate installationSpecific budget
DocumentationModel data and limits
Multisplit 2×1 Mitsubishi Electric MXZ-2F42VF + MSZ-AY25VGK + MSZ-AY35VGK