Saunier Duval Thematek F24 EBT PCB S1047000 Ref. 1008200

Saunier Duval boilers compatible with reference 1008200

PCB with reference 1008200. 33 verified compatibilities: F 25 E and F 24 E.

Verified compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. 1008200 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 1008200. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis on the PCB 1008200

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The boiler does not ignite, there are no lights on the panel.

  Cause: The PCB controls the power supply and operation of the boiler; if it fails, there is no response from the unit.

  Check the fuse on the PCB and the main switch before considering that the part is broken.

• 02

  There is no hot water or heating, although there is gas and water.

  Cause: The PCB commands to open the gas valve and activates the pump; if the control circuit fails, nothing starts.

  Check that the connectors to the gas valve and the pump are properly connected and free of rust before replacing the PCB.

• 03

  The programmer or thermostat cannot change the state of the boiler.

  Cause: The PCB receives and processes the commands; if it fails, it ignores the signals even if they arrive correctly.

  Do not bridge contacts or power components directly to test them. Request a technician to check the cause according to the model manual and its revision, without bypassing the protections. The symptom or fault code does not confirm on its own that this part is faulty.

• 04

  A relay click is heard in the boiler, but it does not ignite.

  Cause: A relay on the PCB that does not close properly causes failed start attempts.

  Check if the click coincides with the gas valve ignition attempt before replacing the PCB.

Fault codes Saunier Duval that require diagnosis

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Saunier Duval 1008200 PCB.

Catalogue reference

1008200

Uniclima internal SKU

CECTF24EBT

Brand

Saunier Duval

Type of part

PCBs (control boards)

Units in stock

0 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Silkscreen marking in the photograph

SYMSI7.0