Saunier Duval Thematek C 24 E Delta Dore Control Panel Ref. 4000120410
Control panel of the Saunier Duval Thematek C 24 E boiler, manufactured by Delta Dore according to the logo and reference 4000120410 printed on the label itself, with revision index 5. It is the panel used to adjust and check the parameters of the boiler. It is replaced when the panel fails or stops responding to the controls.
VAT included
Consult via WhatsAppSaunier Duval boilers compatible with reference S1008100
PCB with reference S1008100. Five confirmed compatibilities: F 24 E and C 24 E.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Saunier Duval F 24 E | Thematek | Contrasted |
| Saunier Duval C 24 E | Thematek | Contrasted |
| Saunier Duval SC 24 E | Thematek | Contrasted |
| Saunier Duval SF 24 E | Thematek | Contrasted |
| Saunier Duval C 24 EO | Thematek | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. S1008100 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference S1008100. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the PCB S1008100 resolves.
The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The control panel screen does not turn on or remains blank.
Cause: The control panel needs to receive power to operate. If it does not receive power or there is an internal fault, the display does not activate.
Check that the connector between the panel and the main PCB is properly seated and without bent pins before replacing the panel.
- 02
The buttons or the remote control do not respond even though the screen appears normal.
Cause: The panel keyboard can wear out or become damp, preventing the key presses from reaching the electronics.
Test each button several times and note if any respond intermittently. If all fail, the issue may be with the entire panel.
- 03
It is not possible to change the temperature or the time programs from the panel.
Cause: The panel converts the pulses into commands for the main PCB. If this conversion fails, the boiler continues to operate with the last set values.
Note if the boiler continues to heat normally even though you cannot modify anything from the panel. This indicates that the problem is with the panel and not with the power PCB.
- 04
The panel shows a communication fault warning with the rest of the boiler.
Cause: The panel and the main PCB communicate through an internal bus. A fault in this connection can generate a warning that does not always indicate that the panel is broken.
Check the wiring or the connector between the panel and the main PCB before considering that the panel is faulty.
Fault codes from Saunier Duval that this spare part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| F12 | No signal from the user interface | Yes — it points to this display/interface module or its connection cable with the main PCB. |
| F18 | User interface fault | Yes — it corresponds to this display/control board module. |
| F13 | Main PCB fault | No — that code is for the MAIN PCB (a different part), not for this display. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Saunier Duval S1008100 PCB.
- Catalogue reference
- S1008100
- Brand
- Saunier Duval
- Type of part
- PCBs (control boards)
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Delta Dore code
- 4000120410
- Review index
- 5
- Brand on PCB
- T 169
- Printed date
- 04-25
Frequently asked questions about the PCB S1008100
Who manufactures the control panel of the Saunier Duval Thematek C 24 E, ref. 4000120410?
Is this control panel compatible with a Saunier Duval Thematek F 24 E?
When should the control panel of the Thematek C 24 E be replaced?
What does 'Ind: 5' mean on the Delta Dore panel label ref. 4000120410?
How many models are compatible with the control panel MCTC24EBT?
What fault codes are documented for this control panel?
Spare parts related to Saunier Duval Thematek
