IRIS1.0 PCB for Saunier Duval ThemaClassic F24E Boiler - Ref. 1008200

Saunier Duval boilers compatible with reference 1008200

PCB with reference 1008200. 33 verified compatibilities: F 25 E and F 24 E.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. 1008200 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 1008200. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis on the PCB 1008200

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The fan does not start when the boiler tries to ignite, or it runs at half speed.

  Cause: The PCB controls the output to the fan; if it fails, the fan does not receive a signal or power.

  With the boiler unplugged, check that the fan spins freely by hand to rule out that it is seized.

• 02

  The room thermostat (TA) does nothing: you raise or lower the temperature and the boiler does not react.

  Cause: The PCB does not receive the demand from the thermostat; if that circuit fails, the command does not reach the rest of the electronics.

  Do not bridge contacts or power components directly to test them. Request a technician to check the cause according to the model manual and its revision, without bypassing the protections. The symptom or fault code does not confirm on its own that this part is faulty.

• 03

  The boiler locks itself during operation, without a clear mechanical reason.

  Cause: A fault in the microcontroller or in one of the relays on the PCB causes lockouts that are not related to gas, water, or pressure.

  Note the exact fault code displayed by the boiler in each lockout: this helps to confirm if it points to the control electronics.

• 04

  An error code related to the PCB appears on the screen, and it does not disappear even after resetting the boiler.

  Cause: The self-diagnosis indicates an internal fault in the PCB, which is usually due to the microcontroller or the power supply stage.

  Reset the boiler once and note if the fault code reappears immediately: if so, point to the PCB.

Fault codes Saunier Duval that require diagnosis

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Saunier Duval 1008200 PCB.

Catalogue reference

1008200

Uniclima internal SKU

CETF24E

Brand

Saunier Duval

Type of part

PCBs (control boards)

Units in stock

6 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Microcontroller

uM37481M8-319SF (series IRIS-S14, code 225101)

PCB model (silkscreen)

IRIS1.0

Production code / barcode

4000 120401/5

SOFREL marking on the PCB

N° SOFREL 0310129400F8

Transformer manufacturer

Myrra

Saunier Duval reference

1008200 (IRIS1.0 PCB, Myrra transformer, 3 relays, terminal block H/P/R/FAN/EXT/230V/TA)