Saunier Duval Flowmeter Flow Detector ThemaClassic F 24 E Ref. S5720200

Saunier Duval boilers compatible with reference S5720200

Flow meter with reference S5720200. 33 confirmed compatibilities: ThemaClassic C24E and ThemaClassic C25E.

Verified compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. S5720200 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference S5720200. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis in the flow meter S5720200

The flow meter detects the passage of water to activate the domestic hot water. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  You turn on the tap and the boiler doesn't react at all, it continues as if no one is asking for water.

  Cause: The flow detector is not sending the signal to the control board, so the domestic hot water system does not start.

  Check that the flow at the tap is normal and that there is no aerator or filter blocked before replacing it.

• 02

  The hot water fluctuates in temperature on its own, without touching anything.

  Cause: A detector with a dirty or worn paddle gives irregular flow readings.

  Check if the fault always occurs after a water cut or only with prolonged use of the tap.

• 03

  With the tap almost closed it doesn't heat, but fully open it does.

  Cause: A minimum flow rate is required for the detector to close the contact and request ignition.

  Try opening the tap to the maximum; if it turns on, check the mains pressure before the detector.

• 04

  Do you notice a faint noise or rattling in the hot water pipe when you turn on the faucet?

  Cause: A loose or worn internal moving part can vibrate as water flows through.

  Check if the noise disappears by lowering the inlet pressure before attributing it to the sensor.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Saunier Duval S5720200 flow meter

Catalogue reference

S5720200

Uniclima internal SKU

DFTF24E

Brand

Saunier Duval

Type of part

Flow detectors

Units in stock

6 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Saunier Duval Thematek S F24E Manual (PDF) Document © Saunier Duval, provided as a technical reference.