Vaillant Turbotec Plus VMW 24 282 4 5 Display Ref. 130822
RefurbishedVaillantPCBs (control boards)

Vaillant Turbotec Plus VMW 24 282 4 5 Display Ref. 130822

Stock · 1 unit

The Vaillant Turbotec Plus VMW 24 282 4 5 Ref. 130822 is a control PCB that manages functions such as ignition, burner modulation, and the boiler pump. When this part fails, the boiler may not start, become locked, or exhibit erratic behavior. It is installed in models such as ES/PT 242/4-5, ES/PT 282/4-5, 24/282-5, among others. It is advisable to replace it if you notice that the boiler is not functioning properly or is experiencing starting issues.

VAT included

Compatibility

Compatible Vaillant boilers

PCB. Six confirmed compatibilities: ES/PT 242/4-5 and ES/PT 282/4-5.

Proven compatibility

Boiler modelFamilyVerification
Vaillant ES/PT 242/4-5VMContrasted
Vaillant ES/PT 282/4-5VMContrasted
Vaillant 24/282-5VMWContrasted
Vaillant 242/2-5VMWContrasted
Vaillant 282/2-5VMWContrasted
Vaillant ES 24/282/4-5VMWContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if it is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference —. If it is not visible, do not identify the part by its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the PCB (control board) resolves

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The display does not turn on or show any icons when starting the boiler.

    Cause: The module may not be properly seated or may not be receiving power.

    Remove and reattach the module on the main PCB, ensuring that the pins are properly aligned, before replacing it.

  • 02

    The water temperature and the radiator icon are not visible on the display.

    Cause: The module is not functioning correctly and does not display the information, although the boiler can still heat.

    Check if hot water comes out of the tap normally: if so, the fault is in the display module and not in the operation of the boiler.

  • 03

    The display shows incomplete letters or segments, as if pieces are missing.

    Cause: It is a common wear of the module panel over time, not related to the main PCB.

    Note which part of the display is missing and if it changes with the heat from the burner, to differentiate it from a simple bad contact.

  • 04

    The module appears to be on but does not respond to anything, no beeps or changes.

    Cause: It may be receiving power but not communicating properly with the PCB.

    Check that the module is firmly seated on the PCB, with no play, before purchasing it as a faulty part.

Fault codes from Vaillant that this part resolves.

CodeFaultDiagnosis and solution
E 01The boiler cannot ignite the flame.The boiler cannot ignite the flame. This may be due to issues with the gas supply or a fault in the ignition system. If you see this code, check that the gas shut-off valve is open and that there are no obstructions, but also consider that the PCB may be failing.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Vaillant PCB data sheet

Brand
Vaillant
Type of part
PCBs (control boards)
Units in stock
1 unit
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days
Frequently Asked Questions

Frequently asked questions about the PCB (control board)

Is this display module compatible with the Vaillant Turbotec Plus VMW 242/2-5?
Yes, it is on the list of compatible models, which covers the ranges VM/VMW 24/282/4-5 and 24/282/2-5.
What does the display of the Vaillant Turbotec Plus module show when it is operating?
On the photographed unit, it displayed the temperature (13°) with a radiator icon.
Where is this display module mounted on the Vaillant Turbotec Plus?
It is mounted on the green main PCB of the boiler.
How many models are compatible with this Vaillant display module?
This display module is compatible with a total of 6 models.
What is the reference for this display module?
The reference for this display module is DCTTPVM282.
What fault codes are documented for this product?
There are no documented fault codes for this product.

Spare parts related to Vaillant VMW

Entrega calculada por destinoDelivery time shown at checkout
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Vaillant Turbotec Plus VMW 24 282 4 5 Display Ref. 130822