Vaillant Turbotec VMW ES 282 5 PCB Ref. 0020034604
The Vaillant Turbotec VMW ES 282 5 PCB (control board) Ref. 0020034604 is a crucial component that controls the ignition, burner modulation, pump, and safety features of the boiler. If this part fails, the boiler may not start, lock out, or operate erratically, which can lead to faults such as F.33 and F.36 related to gas evacuation. It is installed in models from the VMW, VM, and VMI ranges, including, among others, the VMW 282/2-5 and the VM 240/2-5. A technician must confirm through diagnosis whether it needs to be replaced when these operational issues arise.
- Type of part
- PCBs (control boards)
- Status
- Refurbished
- Catalogue reference
- 0020034604
- Warranty
- 1 year
Vaillant boilers compatible with reference 0020034604
PCB with reference 0020034604. 14 verified compatibilities: VMW 240/2-3 and VMW 240/2-3 R1.
Verified compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Vaillant VMW 240/2-3 | VMW (mixed turboTEC/turboMAX, wall-hung mixed) | Verified |
| Vaillant VMW 240/2-3 R1 | VMW (mixed turboTEC/turboMAX, wall-hung mixed) | Verified |
| Vaillant VMW 242/2-3 R1 | VMW (mixed turboTEC/turboMAX, wall-hung mixed) | Verified |
| Vaillant VMW 242/2-3 R2 | VMW (mixed turboTEC/turboMAX, wall-hung mixed) | Verified |
| Vaillant VMW 242-5 | VMW (mixed turboTEC/turboMAX, wall-hung mixed) | Verified |
| Vaillant VMW 280/2-5 | VMW (mixed turboTEC/turboMAX, wall-hung mixed) | Verified |
| Vaillant VMW 282/2-5 | VMW (mixed turboTEC/turboMAX, wall-hung mixed) | Verified |
| Vaillant VM 240/2-5 | VM (heating only) | Verified |
| Vaillant VM 242/2-5 | VM (heating only) | Verified |
| Vaillant VM 280/2-5 | VM (heating only) | Verified |
| Vaillant VM 282/2-5 | VM (heating only) | Verified |
| Vaillant VM 202/2-5 | VM (heating only) | Verified |
| Vaillant VMI 280-7 | VMI (compact interior) | Verified |
| Vaillant VMI 282-7 | VMI (compact interior) | Verified |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 0020034604 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 0020034604. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis on the PCB 0020034604
The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler shows no signs of life, neither the display nor any startup noise.
Cause: The PCB does not distribute electrical power to the other components.
Check the internal fuse of the PCB and verify the arrival of mains voltage before replacing it.
- 02
Ignition sparks occur but the boiler never ignites the burner.
Cause: The PCB does not send the gas opening command at the appropriate time after ignition.
Check the ignition electrode and its cable before assuming the fault is with the PCB.
- 03
The fault code displayed on the screen changes each time it is reset.
Cause: The internal electronics of the PCB intermittently fail to process the signals from the sensors.
Note each code that appears and check if it always matches the same sensor before changing the PCB.
- 04
The heating works but the domestic hot water does not come out hot, or vice versa.
Cause: The PCB does not manage the switching between the two circuits of the boiler properly.
First, check the three-way valve and its motor before blaming the PCB.
- 05
The boiler turns off by itself in the middle of use and needs to be reset to work again.
Cause: An internal fault in the PCB causes safety shutdowns without apparent cause in the rest of the circuit.
Check the grounding and ensure there is no moisture near the boiler before replacing the PCB.
Vaillant fault codes that require diagnosis
| Code | Fault | Technical checks |
|---|---|---|
| F.33 | Gas evacuation fault | This code indicates a problem in the gas evacuation path. If the PCB is not functioning properly, it may not be managing the fan or the blockage in the flue correctly. Check the evacuation system and the PCB. |
| F.36 | Gas evacuation fault | This error indicates a fault in the gas flue path. If the PCB is not operational, it may not be properly managing the fan or detecting blockages. Check the flue system and the PCB. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Vaillant 0020034604 PCB.
- Catalogue reference
- 0020034604
- Uniclima internal SKU
- PECVMW0501
- Brand
- Vaillant
- Type of part
- PCBs (control boards)
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Vaillant VM 282/2-5 Manual (PDF) Document © Vaillant, provided as a technical reference.
Frequently asked questions about the PCB 0020034604
Is this PCB suitable for a Vaillant VMI 282-7?
Is this PCB also suitable for a Vaillant VU 282-5?
Spare parts related to Vaillant VMW (combi turboTEC/turboMAX, wall-mounted combi)
